Advanced Micro Devices
[AMD Public Use]
AMD-RAIDXpert2 User
Guide
Publication #
53987
Revision:
3.11
Issue Date:
June 2020
[AMD Public Use]
© 2013—2020 Advanced Micro Devices, Inc. All rights reserved.
The information contained herein is for informational purposes only, and is subject to change without notice. While
every precaution has been taken in the preparation of this document, it may contain technical inaccuracies, omissions
and typographical errors, and AMD is under no obligation to update or otherwise correct this information. Advanced
Micro Devices, Inc. makes no representations or warranties with respect to the accuracy or completeness of the
contents of this document, and assumes no liability of any kind, including the implied warranties of noninfringement,
merchantability or fitness for particular purposes, with respect to the operation or use of AMD hardware, software
or other products described herein. No license, including implied or arising by estoppel, to any intellectual property
rights is granted by this document. Terms and limitations applicable to the purchase or use of AMD’s products are
as set forth in a signed agreement between the parties or in AMD's Standard Terms and Conditions of Sale.
Trademarks
AMD, the AMD Arrow logo, and combinations thereof are trademarks of Advanced Micro Devices, Inc. Other
product names used in this publication are for identification purposes only and may be trademarks of their respective
companies.
Reverse engineering or disassembly is prohibited.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
Linux is a registered trademark of Linus Torvalds.
PCIe is a registered trademark of PCI-Special Interest Group (PCI-SIG).
USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES WITH THE MPEG ACTUAL OR DE FACTO
VIDEO AND/OR AUDIO STANDARDS IS EXPRESSLY PROHIBITED WITHOUT ALL NECESSARY
LICENSES UNDER APPLICABLE PATENTS. SUCH LICENSES MAY BE ACQUIRED FROM VARIOUS
THIRD PARTIES INCLUDING, BUT NOT LIMITED TO, IN THE MPEG PATENT PORTFOLIO, WHICH
LICENSE IS AVAILABLE FROM MPEG LA, L.L.C., 6312 S. FIDDLERS GREEN CIRCLE, SUITE 400E,
GREENWOOD VILLAGE, COLORADO 80111.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Contents
3
Contents
Contents .................................................................................................................................... 3
List of Tables .................................................................................................................................. 10
List of Figures ................................................................................................................................. 11
Revision History ............................................................................................................................. 12
Chapter 1 Getting Started ....................................................................................................... 16
1.1 RAIDXpert2 Technology ................................................................................................ 16
1.2 Who Should Use This User Guide ................................................................................... 16
1.3 System Requirements for Using RAIDXpert2 ................................................................ 16
Supported Processors and Chipsets ......................................................................... 17
Supported Operating Systems .................................................................................. 17
1.4 Features of RAIDXpert2 .................................................................................................. 18
1.5 RAIDXpert2 Feature Set ................................................................................................. 20
Chapter 2 Understanding Arrays, Disks and RAID Levels ................................................. 24
2.1 Understanding Arrays ...................................................................................................... 24
2.2 RAID Levels .................................................................................................................... 24
2.3 Array States ...................................................................................................................... 25
2.4 Creating Arrays: Future Expansion ................................................................................. 27
2.5 Expanding Disk Capacity Online: Using OCE ................................................................ 27
2.6 Migrating RAID Levels Online: Using ORLM ............................................................... 28
2.7 Array Tasks: Starting and Stopping Tasks ...................................................................... 28
2.8 Understanding Disks ........................................................................................................ 29
Disks States .............................................................................................................. 29
Disks ........................................................................................................................ 30
2.9 Rescanning Disks for Changes in State ........................................................................... 31
2.10 Sparing Options: Disks and Arrays ................................................................................. 32
2.11 Dedicated Sparing ............................................................................................................ 32
2.12 Global Sparing ................................................................................................................. 33
2.13 RAID Performance Considerations ................................................................................. 33
Number and Organization of Disks ......................................................................... 34
Caching Attributes ................................................................................................... 34
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
4
Contents
Application Workload ............................................................................................. 34
2.14 RAID Reliability Considerations .................................................................................... 34
Data Redundancy .................................................................................................... 34
Backup ..................................................................................................................... 34
2.15 Flexibility and Expansion Considerations....................................................................... 34
2.16 Multiple RAID Levels ..................................................................................................... 35
Chapter 3 Platform BIOS RAID Configuration Prerequisites ........................................... 36
3.1 Enable RAID for the x570/590 AMD Socket AM4-Compatible Processors ................. 36
3.2 Enable RAID for the 300/400/500 AMD Socket AM4-Compatible Processors ............ 37
3.3 Enable RAID for the AMD SP3-Series Chipsets ............................................................ 37
3.4 Enable RAID for the AMD Socket AM4-Compatible Processors .................................. 39
3.5 When to Use the RAIDXpert2 Configuration Utility (HII) ............................................ 40
3.6 Access the AMD RAIDXpert2 Configuration Utility (HII) ........................................... 41
3.7 Initialize Disks................................................................................................................. 41
3.8 Create Arrays................................................................................................................... 42
Before You Begin .................................................................................................... 42
Create an Array ....................................................................................................... 42
3.9 Delete Arrays................................................................................................................... 47
Delete an Array ....................................................................................................... 47
3.10 Manage Spares ................................................................................................................ 47
Assign Global Spares .............................................................................................. 47
Assign Dedicated Spares ......................................................................................... 48
Unassign Spares ...................................................................................................... 48
3.11 View Controller Details .................................................................................................. 48
3.12 View Disk Details ........................................................................................................... 49
3.13 View Array Details.......................................................................................................... 50
3.14 Rescan All Channels ....................................................................................................... 50
Chapter 4 Software Installation ............................................................................................. 51
4.1 System Setup Process Overview ..................................................................................... 51
4.2 Before You Begin............................................................................................................ 51
4.3 Copying AMD-RAID Drivers to Removable Storage .................................................... 51
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Contents
5
Copying AMD-RAID Drivers in a Microsoft
®
Windows
®
Environment ............... 51
Copying AMD-RAID Drivers in a Linux
®
Environment ........................................ 52
4.4 Installing AMD-RAID Drivers ........................................................................................ 53
Installing AMD-RAID Drivers While Installing Microsoft
®
Windows
®
................ 53
Installing the AMD RAIDXpert2 Management Suite for Microsoft
®
Windows
®
.. 55
Windows – AMD-RAIDXpert2 Management Suite Desktop Application (Microsoft
Store) ........................................................................................................................ 55
Windows – AMD-RAIDXpert2 Management Suite ................................................ 55
Windows – AMD RAIDXpert2 Management Suite Installation Desktop
Application (Manual Install) .................................................................................... 55
4.5 Installing AMD-RAID Drivers While Installing Linux
®
Operating System ................... 56
Install the AMD-RAID drivers during an Ubuntu Desktop Linux Installation ....... 56
Install the AMD-RAIDXpert2 Management Application ....................................... 58
Install the AMD RAID Drivers During a RHEL Linux Installation ....................... 59
Install the RAIDXpert2 Management Application .................................................. 63
Install the AMD-RAID drivers during a Debian Linux Installation ........................ 64
Install the AMD-RAIDXpert2 Management Application ....................................... 66
Chapter 5 RAID Software Update.......................................................................................... 68
5.1 Purpose ............................................................................................................................. 68
5.2 System Overview Process ................................................................................................ 68
5.3 Updating the AMD RAIDXpert2 Management Suite. .................................................... 68
AMD RAIDXpert2 UWP Management Suite ......................................................... 69
Update the AMD RAIDXpert2 Management Application (GUI)—AMD RAID
Installer .................................................................................................................... 69
Ubuntu – Update the AMD-RAIDXpert2 Management Application ...................... 70
RHEL - Update the AMD-RAIDXpert2 Management Application ........................ 70
Debian – Update the AMD-RAIDXpert2 Management Application ...................... 71
5.4 Updating the AMD-RAID OS Drivers – SOC and AMD 300-Series Chipset ................ 71
Windows—AMD RAID Installer ............................................................................ 71
Windows 10—Manually .......................................................................................... 72
5.5 Linux
®
Drivers ................................................................................................................. 73
Ubuntu – Update Drivers or Resync with an Updated Ubuntu Kernel.................... 73
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
6
Contents
RHEL - Update the AMD-RAID Drivers ............................................................... 73
Debian – Update the AMD-RAID Drivers ............................................................. 74
5.6 Adding NVMe to Existing AMD-RAID System ............................................................ 74
Update Windows
®
10 Drivers for SoC and AMD 300/400/500-Series Chipsets ... 74
Update Platform BIOS ............................................................................................ 74
Install the AMD-RAID Driver for NVMe .............................................................. 75
Chapter 6 AMD RAIDXpert2 Graphical User Interface (GUI) ......................................... 77
6.1 Start RAIDXpert2 ........................................................................................................... 77
Desktop Shortcut Access ......................................................................................... 77
6.2 Reviewing the RAIDXpert2 GUI .................................................................................... 78
The Array View Section of the Array Status Window ............................................ 78
The Disk List Section of the Array Status Window ................................................ 80
The Array List Section of the Array Status Window .............................................. 81
The Event View Section of the Array Status Window ............................................ 82
Array and Disk Commands ..................................................................................... 83
6.3 Working with Disks ........................................................................................................ 83
Rescan Disks ........................................................................................................... 83
Initialize Disks ......................................................................................................... 84
Clear Metadata Description ..................................................................................... 84
Change Cache Properties for Disks ......................................................................... 84
Options .................................................................................................................... 85
6.4 Working with Arrays ....................................................................................................... 85
Create and Format Arrays ....................................................................................... 85
Name Arrays ........................................................................................................... 88
Transform Arrays .................................................................................................... 88
Restore (Rebuild) Arrays ........................................................................................ 91
Prepare to Physically Remove an Array ................................................................. 92
Delete Arrays ........................................................................................................... 93
Cache Settings for Arrays ....................................................................................... 94
Change the Priority Level of a Task ........................................................................ 94
Interrupt, Cancel, or Resume a Task ....................................................................... 95
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Contents
7
Check for Consistency ............................................................................................. 95
Scan an Array in the Background ............................................................................ 96
Add or Remove Dedicated Spares ........................................................................... 97
Add or Remove Global Spares ................................................................................ 97
Hide an Array ........................................................................................................... 97
Secure Erase ............................................................................................................. 98
6.5 Working with Views ........................................................................................................ 98
Display or Hide Controller Event Log Panel ........................................................... 98
Log Window ............................................................................................................ 98
Refresh the Display .................................................................................................. 99
View Controllers ...................................................................................................... 99
6.6 Working with Options ..................................................................................................... 99
Event Notifications .................................................................................................. 99
6.7 Add Spares Using a RAIDABLE Array ........................................................................ 100
Chapter 7 rcadm Command Line Interface Tool ............................................................... 101
7.1 What is rcadm? .............................................................................................................. 101
To Use rcadm with a Linux
®
Operating System .................................................... 102
To Use rcadm with a Windows
®
Operating System .............................................. 102
7.2 Manage Arrays and Disks: rcadm --manage .................................................................. 102
Understand Query Output ...................................................................................... 102
rcadm Controller List Elements ............................................................................. 103
rcadm Disk List Elements ...................................................................................... 104
rcadm Array List Elements .................................................................................... 105
7.3 View Help from the Command Line ............................................................................. 106
To view a List of the Major Modes of Operation .................................................. 106
7.4 Create New Arrays: rcadm --create ............................................................................... 106
Before You Begin... ............................................................................................... 107
Example ................................................................................................................. 107
7.5 Delete Arrays: rcadm --delete ........................................................................................ 107
Before You Begin... ............................................................................................... 107
Example ................................................................................................................. 107
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
8
Contents
7.6 Transform Arrays: rcadm --transform ......................................................................... 108
Before You Begin... ............................................................................................... 108
7.7 Follow or Monitor Arrays and Disks: rcadm --follow .................................................. 108
Before You Begin... ............................................................................................... 108
7.8 rcadm.efi Information.................................................................................................... 108
rcadm -? ................................................................................................................. 108
rcadm -M ............................................................................................................... 109
rcadm -C ................................................................................................................ 114
rcadm -D ................................................................................................................ 116
Chapter 8 Troubleshooting ................................................................................................... 118
8.1 Troubleshooting ............................................................................................................ 118
8.2 System Startup Problems .............................................................................................. 118
8.3 Warning Messages: POST Screen................................................................................. 119
8.4 Array-Related Errors ..................................................................................................... 120
8.5 Disk Related Errors ....................................................................................................... 124
Troubleshooting Disks .......................................................................................... 124
8.6 Troubleshooting the RAIDXpert2 GUI......................................................................... 125
Chapter 9 Safety Precautions ............................................................................................... 126
9.1 General .......................................................................................................................... 126
9.2 Safety Definitions .......................................................................................................... 126
9.3 Caution Messages .......................................................................................................... 126
Caution Messages About Disks ............................................................................. 126
Caution Messages about Arrays ............................................................................ 127
Chapter 10 Software License: EULA .................................................................................... 129
10.1 Software License: End-User License Agreement (EULA) ........................................... 129
Limited License to Authorized Distributors .......................................................... 129
Limited License to End Users ............................................................................... 130
Restrictions ............................................................................................................ 130
Proprietary Rights ................................................................................................. 130
Terms and Conditions ........................................................................................... 131
No Warranty .......................................................................................................... 131
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Contents
9
Limitation of Liability............................................................................................ 131
Export Controls ...................................................................................................... 132
General ................................................................................................................... 132
Appendix A Browser Setup ...................................................................................................... 133
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
10
List of Tables
List of Tables
Table 1. Document Convention ...................................................................................................... 15
Table 2. Glossary of Terms ............................................................................................................. 15
Table 3. System Requirements for RAIDXpert2 ............................................................................ 16
Table 4. Supported Processors and Chipsets ................................................................................... 17
Table 5. Features of RAIDXpert2 ................................................................................................... 18
Table 6. Supported Feature Set for RAIDXpert2 ............................................................................ 20
Table 7. RAID Levels – General Characteristics ............................................................................ 24
Table 8. Array States ....................................................................................................................... 26
Table 9. Device Failure by RAID Level ......................................................................................... 26
Table 10. Array Expansion Considerations ..................................................................................... 27
Table 11. Types of Tasks per Array ................................................................................................ 29
Table 12. Disk States ....................................................................................................................... 29
Table 13. New and Legacy Disks, as They Appear in the RAIDXpert2 Configuration Utility (HII)
and RAIDXpert2 ..................................................................................................................... 31
Table 14. Sparing Options ............................................................................................................... 32
Table 15. When to use the AMD-RAID RAIDXpert2 Configuration Utility (HII)........................ 40
Table 16. Default Cache Tag Size ................................................................................................... 43
Table 17. Elements of the Array View Section, Array Status Window .......................................... 78
Table 18. Elements of the Disk List Section, Array Status Window .............................................. 80
Table 19. Elements of the Array List Section, Array Status Window ............................................ 81
Table 20. Elements of the Event View Section, Array Status Window .......................................... 82
Table 21. Disk Menu Commands .................................................................................................... 83
Table 22. Array Menu Commands .................................................................................................. 86
Table 23. Creating Arrays: Issues and Recommendations .............................................................. 86
Table 24. Transforming Arrays: Issues and Recommendations ..................................................... 89
Table 25. Deleting Arrays: Issues and Recommendations .............................................................. 93
Table 26. Cache Array Options ....................................................................................................... 94
Table 27. Event Log Priority Levels ............................................................................................... 99
Table 28. Modes for the rcadm Program ....................................................................................... 101
Table 29. rcadm Controller List Elements .................................................................................... 103
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
List of Figures
11
Table 30. rcadm Disk List Elements .............................................................................................. 104
Table 31. rcadm Array List Elements ............................................................................................ 105
Table 32. The System Does Not Boot ........................................................................................... 118
Table 33. The BIOS Configuration Utility Does Not Display....................................................... 119
Table 34. POST Screen Warning Messages .................................................................................. 119
Table 35. Cannot Create an Array ................................................................................................. 121
Table 36. An Array is in a Critical State ........................................................................................ 122
Table 37. An Array is in an Offline State ...................................................................................... 122
Table 38. Cannot Assign a Dedicated Spare to an Array .............................................................. 122
Table 39. Cannot Create a Global Spare ........................................................................................ 123
Table 40. Recreate a Deleted Array ............................................................................................... 123
Table 41. Disk Errors ..................................................................................................................... 124
Table 42. RAIDXpert2 Graphical User Interface (GUI) Troubleshooting .................................... 125
List of Figures
Figure 1. AMD RAIDXpert2 Login Page....................................................................................... 77
Figure 2. Array Status Window ...................................................................................................... 79
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
12
Revision History
Revision History
Date
Revision
Description
May 2020
3.11
Added install instructions for the AMD-RAID drivers during a RHEL Linux
installation.
Added install instructions for the AMD-RAID BIOS drivers during an Ubuntu
DT Linux installation.
Added an Appendix
Updated trademarks pages.
Removed references to web.
Added references to RAIDXpert2.
Removed references to no longer supported operating systems.
Added TRX40 platform chipset and RAID5 support information.
Removed Chapter 5.
Removed section 7.5.2.1.
Added information for SATA and NVME.
June 2019
3.10
Updated and added new information to Chapters 1, 2, and 4-11.
Updated Table 3. Updated the memory requirements.
Updated Table 4. Updated chipset names.
Updated Table 6. Removed references to licensing type.
Updated Section 2.3.2. Updated the release designations.
Added Section 11.6. Troubleshooting information for the Web Graphical User
Interface (GUI).
February 2019
3.09
Updated Section 12.1.4, Proprietary Rights.
January 2019
3.08
Updated Table 9 and Table 33.
Editorial corrections
March 2018
3.07
NVMe RAID validation update
Added references to CTS – Cache Tag Size – in Array Creation, Web GUI and
rcadm.
July 2017
3.06
Updated the steps to install xampp for RHEL and Ubuntu Operating systems
June 2017
3.05
Fourth Public Release.
• Updated steps to install Ubuntu OS in RAID mode.
• Removed references to RAIDXpert2 Plus.
• Removed references to RAID-5 array.
• Edited steps to Assign and Unassign spares.
• Removed the section related to “Change the Controller Options”
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Revision History
13
Date
Revision
Description
December 2016
3.02
Third Public Release.
• Added a new chapter for RAIDXpert2 Configuration Utility (HII).
• Added a new chapter for RAID Driver Software Update.
• Updated Operating System Requirements.
• Updated revisions of Ubuntu Desktop Linux to 16.04 32 bit and 64 bit
• Updated revisions of RedHat (RHEL) 7.3 64 bit
• Updated steps for BIOS and UEFI boot platforms.
• Removed support for Ubuntu 15.04, 15.10.
• Removed support for RedHat 7.2 (RHEL)
June 2016
3.01
Second Public Release.
Removed support for the Microsoft
®
Windows
®
8 operating system.
Removed support for Ubuntu 13.10. This included removing extra steps that
concerned Ubuntu 13.10.
Updated Operating System Requirements
Removed references to Windows XP and Windows 8.1.
Replaced SUSE (SLED) references with Red Hat (RHEL) 7.2 64 bit
Updated revisions of Ubuntu Desktop Linux
• 15.04 32 bit and 64 bit
• 15.10 32 bit and 64 bit
Removed support for SLED
Removed support for Ubuntu 12.04.04 and 14.04, 32 bit and 64 bit
Changed supported controllers
Removed RAID5 from Table 6 and Table 8
Updated steps for BIOS and UEFI boot platforms
November 2013
3.00
Initial Public release
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
14
Preface
Preface
This user guide:
• Describes requirements on how to configure RAID mode on AMD platforms.
• Provides information about arrays, disks, and RAID levels (RAID types).
• Describes how to improve storage system performance or reliability by understanding
array and disk tasks and options.
• Describes the procedures on how to acquire and load RAIDXpert2 drivers for supported
Microsoft
®
Windows
®
operating systems and Linux
®
operating systems.
• Describes supported features and procedures for using RAIDXpert2, which is the
RAIDXpert2 GUI.
Intended Audience
This user guide is intended for use by system administrators and technicians who are experienced
with the following:
• Direct Attached Storage (DAS), Storage Area Network (SAN), or Network Attached
Storage (NAS) operators
• Network administration
• Network installation
• Storage system installation and configuration
Prerequisites
Prerequisites for installing and configuring this product include familiarity with:
• Servers and computer networks
• RAID and input/output signal technology (such as SCSI, SATA, or NVMe)
• Fibre Channel and Ethernet protocols
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Preface
15
Document Conventions and Symbols
Table 1. Document Convention
Convention
Element
Navy blue, underlined text
(http.//www.example.com)
Web site addresses
Bold font
Key names
Text typed into a GUI element, such as into a box
GUI elements that are clicked or selected, such as menu and
list items, buttons, and check boxes
Italics font
Text emphasis
Monospace font
File and directory names
System output
Code
Text typed at the command line
Monospace, Italic font
Code variables
Command line variables
Monospace, bold font
Emphasis of file and directory names, system output, code,
and text typed at the command line
Customer Support
For customer support, contact your system supplier or motherboard vendor.
Glossary
Table 2. Glossary of Terms
Term
Definition
rcadm
A command line interface (CLI) tool for managing RAID controllers on
Linux
®
, on Windows
®
, and UEFI operating systems. It is used for
creating, transforming, and deleting arrays; and adding and removing
disks.
disk
Legacy disks include new or unrecognized disks which may contain data
or even an operating system. Legacy disks appear in the RAIDXpert2
Configuration Utility (HII) as legacy arrays. When the legacy disk is
initialized, configuration data is written to the disk. The legacy array
then becomes an online disk usable in arrays.
CAUTION: A legacy disk can contain valid data. When a legacy disk is
initialized, all data on the disk is lost.
Linux
®
Free, open-source UNIX-based operating system.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
16
Chapter 1
Chapter 1 Getting Started
1.1 RAIDXpert2 Technology
RAIDXpert2 consists of (a) storage management and (b) a RAID controller and port virtualization.
RAIDXpert2 runs on existing systems by using a motherboard’s built-in SATA ports, PCIe M.2
slots and PCIe NVMe Add-in cards.
1.2 Who Should Use This User Guide
Only trained, experienced, and authorized personnel should install RAIDXpert2 and use its
features and capabilities.
All unit operators must be familiar with system hardware, data storage, RAID technology,
input/output signal technology (such as NVMe, SCSI, SAS, or SATA), and Direct Attached
Storage (DAS), Network Attached Storage (NAS), and/or Storage Area Network (SAN) concepts
and technology.
The intended user audience of this user guide is system administrators and experienced users.
1.3 System Requirements for Using RAIDXpert2
Make sure the systems that use RAIDXpert2 meet the requirements indicated in Table 3.
Table 3. System Requirements for RAIDXpert2
Component
Requirements
Memory (RAM)
Minimum: 2 at 8 GB, for a total of 16 GB for AMD Ryzen
®
processors
and AMD Ryzen
®
desktop processors.
Recommended: 4 at 8 GB for a total of 32 GB for AMD Ryzen
®
desktop
processors.
Storage Devices
1–14, ATAPI DVD, SATA, or SSD drives or M.2 SATA drives or NVMe
M.2 HHHL. The number of disks depends on the number, type, and
capacity of the arrays to be created.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 1
Getting Started
17
Supported Processors and Chipsets
The following processors are supported by the current release of RAIDXpert2:
Table 4. Supported Processors and Chipsets
Supported Processors &
Chipsets
Description
Supported AMD Processors
3nd Gen AMD Ryzen™ Threadripper™ Processor
3rd Gen AMD Ryzen™ Desktop Processor
2nd Gen AMD Ryzen™ Threadripper™ Processor
2nd Gen AMD Ryzen™ Desktop Processor
AMD Ryzen™ Threadripper™ Processor
AMD Ryzen™ Desktop Processor
AMD Ryzen™ Desktop Processor with Radeon™ Vega Graphics
Supported AMD Chipsets
AMD X570 Chipset
AMD X470 Chipset
AMD X399 Chipset
AMD B450 Chipset
AMD X370 Chipset
AMD B350 Chipset
AMD A320 Chipset
Supported Operating Systems
RAIDXpert2 supports the following operating systems:
RC-9.3.x Release:
• Microsoft
®
Windows
®
10—64 bit.
New sTRX4 chipset supports the following:
• Ubuntu 20.04
• RHEL 8.2
• Debian 10.3
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
18
Getting Started
Chapter 1
1.4 Features of RAIDXpert2
The features of RAIDXpert2 described in this user manual apply to all supported operating
systems.
Table 5 describes these features. Also see Table 6, on page 20, for a summary of features that are
available with the RAIDXpert2 license.
Table 5. Features of RAIDXpert2
RAIDXpert2 Feature
Description
Arrays (general
information)
RAIDXpert2 allows:
• An array refers to data storage created by RAIDXpert2 from one or
more disks. Although an array can be created from several disks, it is
seen by the operating system as a single disk.
• Creating arrays of different RAID levels using the same disks.
• Creating different RAID level arrays on the same disk, to adapt each
array to the I/O that it processes.
• Creating an array from a mix of different type disks. For example, a
RAID10 array can be created from a group of disks that contain two
SATA II HDDs and two SATA SSDs or only on NVMe or group of
SATA and NVMe disks.
• Migrating an existing array to another RAID level, if the type of
array being used is not the optimal type for the application. This
function depends on the array capacity, redundancy level,
RAIDXpert2 license level and capacity of the drive or free space
available.
Array Hiding
An array can be hidden from the operating system so that neither the
software nor users can see or access it.
Array Recovery
If a redundant array is accidentally deleted, it might be recovered by
creating a new array with the same properties as the deleted array. (This
can occur only if disk Write Access operations are not in-progress.)
Background Array
Initialization (BGI)
The background initialization of a redundant array creates the redundant
data that allows the array to survive a disk failure.
Background initialization allows a redundant array to be used
immediately. Data is not lost if a disk goes offline prior to completion of
the BGI process.
Cache Support for Arrays
Various array-caching options are supported: No Cache, Read Ahead
Cache, Write Back Cache, Read Ahead and Write Back Cache.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 1
Getting Started
19
Table 5. Features of RAIDXpert2 (Continued)
RAIDXpert2 Feature
Description
Cache Support for Disks
Various disk-caching options are supported: No Cache, Read Ahead
Cache, Write Back Cache, Read Ahead and Write Back Cache.
Note: By default, NVMe Physical disk Read Ahead and Write Back
cache are always disabled. User cannot enable the setting as it
may impact the operational performance of the NVMe disk
Secure Erase
All data on an array can be erased and ensured it is unrecoverable, even
with advanced data recovery techniques.
Consistency Check
A Consistency Check is a background operation that verifies and
corrects the mirror or parity data for fault-tolerant disks. It is
recommended that a Consistency Check be run periodically on an array.
Disk Roaming
With disk roaming, SATA cables can be disconnected from their disks
and shuffled without confusing RAIDXpert2.
Note: Disconnect the SATA cables from the disks only when the system
is shutdown.
Disk roaming also allows:
• Disks to be moved to different slots in the backplane. RAIDXpert2
detects which disks belong to which arrays, regardless of where the
disks are moved in the backplane.
• Disk(s) to be moved between systems.
Note: It might not be possible to move disks between systems if they
contain boot arrays.
Fault Tolerance
The following fault tolerance features are available with RAIDXpert2,
in order to prevent data loss in case of a failed disk.
• Disk failure detection (automatic).
• Array rebuild using hot spares (automatic, if the hot spare is
configured for this functionality).
• Hot-swap manual replacement of a disk without rebooting the
system (available only for systems with a backplane that supports
hot-swapping) is not recommend for disks that are part of the Boot
Virtual Disk or are connected to the AMD RAID supported
chipsets. This applies to all chipsets.
For example, if a disk fails in a RAID1, the array remains functional
and data is read from the surviving mirrored disk.
Mirror Rebuilding
A broken mirrored array can be rebuilt after a new disk is inserted and
the disk is designated as a spare. The system does not have to be
rebooted.
Multiple RAID Levels per
Disk
Support for multiple array levels per disk allows the administrator to
create arrays of different RAID levels using the same disks.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
20
Getting Started
Chapter 1
Table 5. Features of RAIDXpert2 (Continued)
RAIDXpert2 Feature
Description
Native Command Queuing
(NCQ)
Native Command Queuing is a command protocol of disks that are
supported by RAIDXpert2. NCQ enables individual disks to internally
optimize the order in which Read and Write commands are executed.
RAIDXpert2 permits a queue depth of up to 32 read/write commands
per disk.
Online Capacity Expansion
(OCE)
OCE is a process that allows the user to add storage capacity to an
existing array, without taking the system offline. OCE enables the user
to increase the total storage capacity of an array by integrating unused
storage into the array.
Data can be accessed while the disks are added and while data on the
array is being redistributed.
Online RAID Level
Migration (ORLM)
With online RAID level migration, users can easily move an array from
one RAID level to another. While the migration is taking place, data is
accessible and protected to the lowest protection of either the source
RAID level or the destination RAID level.
RAID Level Support
RAIDXpert2 supports RAID levels 0, 1, 5, 10, Volume, and
RAIDABLE.
Note: RAID5 is only supported for AMD Family 17h Models 31h
sTRX4 processors.
Self-Monitoring Analysis
and Reporting Technology
(SMART)
SMART is a hard-disk-drive (HDD) capability which allows reporting
of reliability information. If a drive anticipates there is a high likelihood
of future failure it triggers a SMART error condition. RAIDXpert2
presents this error condition so the drive can be replaced before the
predicted failure occurs.
1.5 RAIDXpert2 Feature Set
Table 6. Supported Feature Set for RAIDXpert2
Features
Sub-Features
UEFI Driver (BIOS) Support
Create array
Delete array
Raidxpert2 Configuration utility (HII)
efi Shell utility
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 1
Getting Started
21
Table 6. Supported Feature Set for RAIDXpert2 (Continued)
Features
Sub-Features
RAID Levels Supported
1
0
1
10
RAIDable
5
Note: RAID5 is only supported for AMD Family 17h Models 31h
sTRX4 processors.
Volume
Array Creation
No initialization
Foreground initialization
Background array scan
No reboot required
Multiple RAID levels per disk
2
Array Deletion
No reboot required
Array Transformation
Online RAID Level Migration (ORLM)
Sparing
Global
Dedicated
Consistency Check
Background redundancy check
Online Capacity Expansion (OCE)
3
Online RAID Level Migration (ORLM)
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
22
Getting Started
Chapter 1
Table 6. Supported Feature Set for RAIDXpert2 (Continued)
Features
Sub-Features
Drive/Disk Roaming
4
Same-system support
Between-systems support
Non AMD-RAID system (AHCI) NOT supported
RAIDXpert2 GUI (Management GUI)
UWP based interface for Array and Disk Management
rcadm (management CLI)
Drive Interfaces Supported
5
SATA
SSD
ATAPI
M.2 SATA SSD
M.2 NVMe SSD
HHHL NVMe SSD
Dissimilar Disk Support Within the Same
Array
Cache Support
No Cache
Read Ahead Cache
Write Back Cache
Read Ahead and Write Back Cache
Restore (Rebuild) Priority
Touched Region Logging
System Event Log Integration
Instant Create Support
6
Hot-Swap Support
7
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 1
Getting Started
23
Table 6. Supported Feature Set for RAIDXpert2 (Continued)
Features
Sub-Features
NVMe Swap Support
8
Notes:
1. See Chapter 2, Understanding Arrays, Disks and RAID Levels, on page 24, for detailed
information about understanding arrays, RAID levels, and performance and reliability
considerations.
2. Multiple RAID levels (array types) per disk allows the administrator to create different RAID levels
on the same disks. For example: The administrator wants data redundancy for the user data and
creates a RAID1 set using part of the disks’ data. At the same time the administrator wants
performance for the swap spaces and creates a RAID0 array using the rest of the disks’ capacities
(space). This feature is useful in collecting unused capacity from disks with different capacities.
This feature increases data integrity for redundant array types, by logging areas of an array that
have been written to. In the event of a system crash, the logged area’s consistency is checked
and/or corrected. Without this feature, data corruption might occur.
3. The unique ability of RAIDXpert2 to provide online expansion to RAID levels across multiple disks
becomes extremely valuable when expanded storage is a requirement.
4. Disk roaming allows arrays to be moved from port to port, either within the same system or
between systems.
5. See the system’s motherboard specifications for the supported device interface. RC-8.1 and RC-
8.2 branches support only SATA. RC-9.1 and above release branches support SATA, M.2 NVMe
SSD and HHHL NVMe SSD
6. Arrays can be instantly created and used by skipping the background consistency check. For
certain types of redundant arrays this is a viable option and has no data integrity drawbacks. A
consistency check can always be done later. If an initialization is skipped when creating a RAID1,
the array is not redundant until a consistency check is performed.
7. It is not recommended to add a Disk to the system and to the array while the system is
operating.
8. If a user wants to add or remove a NVMe into a system; it is AMD’s recommendation that a reset
of the system is performed, wait for the BIOS screen to appear, then power off the system and
add or remove the NVMe(s).
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
24
Understanding Arrays, Disks and RAID Levels
Chapter 2
Chapter 2 Understanding Arrays, Disks and
RAID Levels
2.1 Understanding Arrays
Arrays are several disks that are grouped together to improve either the performance or reliability
of a storage system. Because some RAID levels enhance performance while others improve
reliability, it is important to consider the user’s needs when planning an array configuration.
Note: It is highly recommended that this user manual be reviewed in its entirety before
configuring arrays. Some of the advanced features of RAIDXpert2 (such as sparing options)
must be understood by the user before creating arrays.
2.2 RAID Levels
RAIDXpert2 supports the RAID levels indicated in Table 7.
Table 7. RAID Levels – General Characteristics
RAID Level
Main Characteristic
Use/Usefulness
RAID0 (Striping)
• Provides the highest performance
but no data redundancy. Data in
the array is striped (distributed)
across several disks.
• Supports 2-8 disks.
• RAID0 arrays are useful for
holding information, such as the
operating system paging file,
where performance is extremely
important, but redundancy is not.
RAID1
(Mirroring)
• Mirrors data on a partition of one
disk to another.
• Supports 2 disks.
• Useful when there are only two
disks available and data integrity
is more important than storage
capacity.
RAID10 (Striped
RAID1 Sets)
• Combines mirrors and stripe sets.
RAID10 allows multiple disk
failures, up to 1 failure in each
mirror that has been striped.
• Supports 4, 6, or 8 disks.
• Offers better performance than a
simple mirror because of the extra
disks.
• Requires twice the disk space of
RAID1 to offer redundancy.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 2
Understanding Arrays, Disks and RAID Levels
25
Table 7. RAID Levels – General Characteristics (Continued)
RAID Level
Main Characteristic
Use/Usefulness
RAID5
• RAID5 is only supported for
AMD Family 17h Models 31h
sTRX4 processors..
• Stripes data as well as parity,
across all disks in the array.
• In the event of a failure,
RAIDXpert2 can restore the lost
data of the failed disk from the
other surviving disks.
• Supports 3-8 disks.
• Offers exceptional read
performance and redundancy.
• Write performance is not an issue
due to the tendency of the
operating system to perform many
more reads than writes.
• Requires only one extra disk to
offer redundancy.
• For most systems with three or
more disks this is the correct
choice for a RAID level.
Volume (JBOD)
• RAIDXpert2 treats one or more
disks or the unused space on a
disk as a single array.
• Supports 1 to 8 disks
Provides the ability to link-together
storage from one or several disks,
regardless of the size of the space on
those disks.
Useful in scavenging space on disks
unused by other disks in the array.
Does not provide performance benefits
or data redundancy. Disk failure will
result in data loss.
RAIDABLE (also
known as RAID
Ready)
• Allows a RAIDABLE disk to be
transformed later to RAID0 or
RAID1.
• Supports one disk.
See RAID0 (Striping), on page 24 or
RAID1 (Mirroring) on page 24 for
post-transformation usefulness.
2.3 Array States
Within the management applications, an array is a logical device that can exist in one of four
states: Normal, Ready, Critical, or Offline.
• In RAIDXpert2, these states display in the Array List section in a column named State.
• Within the rcadm Command Line interface, these states also display in a column named
State.
The array states are defined in Table 8, on page 26.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
26
Understanding Arrays, Disks and RAID Levels
Chapter 2
Table 8. Array States
State
Description
Normal
The Normal state is displayed when everything is functioning correctly.
Ready
The Ready state is displayed while an array is being created.
Critical
The Critical state is displayed when the array is no longer redundant (fault
tolerant) because of one or more disk failures. Arrays can still be read and written
to, but the data is no longer protected should another disk fail.
Offline
The Offline state is displayed when arrays cannot be read or written to because of
one or more disk failures.
Whether an array is marked as Critical or Offline depends upon what RAID level it is and how
many disks within the array have failed. Note the changes in state in Table 9.
Table 9. Device Failure by RAID Level
RAID Level
Failure State
Is Displayed Whenever
RAID1
(Redundant Arrays)
Critical
A single disk fails.
Offline
Two disks fail.
RAID10
(RAID Levels with Multiple
Redundancies)
Critical
A single disk fails in any one of the
sets.
Offline
All the disks in a set fail.
Volume, RAIDABLE and
RAID0
Offline
A single disk fails.
RAID5
(Redundant Array)
Critical
A single disk fails.
Note: RAID5 is only supported for
AMD Family 17h Models 31h
sTRX4 processors.
Offline
Two disks fail.
More than one array can be created using the same set of disks. If a disk is disconnected that
belongs to more than one array, only the arrays that try to access the disk and receive I/O errors
report the failure. For example: there are two arrays, both of which are RAID1 sets and both use
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 2
Understanding Arrays, Disks and RAID Levels
27
disk 4. If a system that is being used by array 1 receives an I/O error when trying to communicate
with disk 4, the state of array 1 changes to Critical. However, the state of array 2 using disk 4 does
not change to Critical until an I/O error is reported. If systems using array 1 are not
communicating with failed disk 4, the state of array 1 still displays as Normal.
If a rescan of all channels is performed after disconnecting a disk, the state of every array using
the missing disk changes from Normal to either the Critical or Offline, depending on the RAID
level.
See Section 2.9, Rescanning Disks for Changes in State, on page 31 for a discussion of when to
rescan disks and the outcomes when doing so.
2.4 Creating Arrays: Future Expansion
When creating arrays, consider whether disk capacity needs to expand in the future. If the file
system must be expanded, perform the tasks indicated in Table 8
Table 10. Array Expansion Considerations
Operating System
Do This...
And Consider This...
Microsoft
®
Windows
®
Format the arrays with
NTFS. Microsoft
Corporation provides a
utility (Diskpart.exe) that can
dynamically extend an NTFS
file system onto any unused
adjacent space.
Note also that using a single
partition per array makes
expansion much easier.
1. The Diskpart.exe utility version
depends on which version of the
Windows operating system is
running.
2. The Diskpart.exe utility can be
found on the CD for some versions
of Windows operating systems, or on
the Microsoft Corporation website
(http://www.microsoft.com)
for other versions. Use the correct
version for the operating system.
Linux
®
Use an expandable file
system.
Because RAIDXpert2 software is
limited to eight arrays, if a large
number of logical volumes are
needed, use a logical volume
manager (LVM).
2.5 Expanding Disk Capacity Online: Using OCE
Online Capacity Expansion (OCE) allows:
• Adding disks to an array at any time to increase an array’s capacity.
• Accessing the array data while it is being redistributed.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
28
Understanding Arrays, Disks and RAID Levels
Chapter 2
To increase the size and organization of an array, transform the array. For more information about
transforming arrays, see Section 6.4.3, Transform Arrays on page 88.
2.6 Migrating RAID Levels Online: Using ORLM
Online RAID Level Migration (ORLM) allows an array to move from one RAID level to almost
any other RAID level. This task includes migrating the array from a non-redundant RAID level to
a redundant RAID level.
Prior to starting a RAID level migration/transformation, make sure that the disks selected for the
destination array have sufficient capacity. RAID level migration/transformation can occur only
when the destination array has the same or larger capacity as the source array.
While the migration/transformation is taking place, data is accessible and protected to the lowest
protection of either the source RAID level or the destination RAID level.
The Transform task can also be used to expand the capacity of an array, by using OCE. It can also
be used as part of the system backup and recovery strategy using the RAID1 and RAID10 levels.
To perform this process, see Section 6.4.3, Transform Arrays on page 88.
2.7 Array Tasks: Starting and Stopping Tasks
Tasks are started when one of the following actions are performed:
• Create a redundant array.
• Transform an array.
• Restore an array.
• Securely erase an array.
• Check for consistency on redundant arrays.
• Verify that data was not corrupted after a system crash (Check Bitmap performed
automatically).
Full task control can be used on Create, Consistency Check, and Bitmap Check tasks. On a
Transform or Restore task for dedicated and global spares, task control can only pause/resume, but
it cannot remove the task. To remove these types of tasks, pause and then remove them.
The tasks indicated in Table 11 on page 29, can be displayed for each array.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 2
Understanding Arrays, Disks and RAID Levels
29
Table 11. Types of Tasks per Array
Task
When Displayed
Transform
While an array is being transformed.
Create
While an array is being created.
Consistency
Check
While verifying the mirror disk (RAID1 or RAID10) consistency is correct.
(For redundant type arrays only.)
Restore
While an array is being restored.
Secure Erase
While an array secure erase is being performed.
Check_Bitmap
While verifying that the mirror halves on a RAID1 or RAID10 set, are
consistent. This action is performed automatically to ensure that data is not
corrupted whenever a system crashes.
Not_Active
When no other tasks are being performed.
2.8 Understanding Disks
Disks States
Within the management applications, a disk can be part of one or more arrays and can exist in one
of five states: Online, Offline, New, Legacy, or SMART Error.
• In RAIDXpert2, these states are displayed in the Disk List section in a column named
State. See Table 18, on page 80, for additional information.
• Within the rcadm command line interface, these states are also displayed in a column
named State. See Table 30, on page 104, and Table 31, on page 105, for additional
information.
The disk states are defined in Table 12.
Table 12. Disk States
Disk State
When Displayed
Online
Whenever the disk is connected, functioning correctly, and RAIDXpert2 can
communicate with it.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
30
Understanding Arrays, Disks and RAID Levels
Chapter 2
Table 12. Disk States (Continued)
Disk State
When Displayed
New
Whenever an uninitialized, new disk is connected.
Legacy
Whenever a disk containing non-RAIDXpert2 configuration data is connected.
Offline
Whenever the disk fails and RAIDXpert2 detects an error condition on the disk.
SMART Error
Whenever the disk reports a SMART error(s) to RAIDXpert2.
A disk can be a member of multiple arrays. A disk failure in one array doesn't necessarily mean it
has failed in other arrays.
After a rescan is performed the following can occur:
• A disconnected disk no longer appears in the Disk List (although the disk appears as
Missing in the Array View for the arrays to which it belonged).
• A disk that experiences a catastrophic failure appears in the Disk List as Offline and is
highlighted in red. The disk appears as Failed for the arrays to which it belonged.
• A disk that has a SMART error appears in the Disk List as SMART Error. (A disk with a
SMART error can’t be used to create an array)
• A disk that experiences a software-related failure appears in the Disk List as Online and is
highlighted in red. New arrays can be created with the disk.
Arrays that exist on a failed or disconnected disk might not be designated as Failed or Missing
until the system attempts to communicate with the failed or disconnected disk.
Disks
A legacy disk is a disk that contains valid data from a Non AMD-RAID controller.
A legacy disk appears in RAIDXpert2 GUI and RAIDXpert2 Configuration Utility (HII) with a
corresponding legacy array. When the legacy disk is initialized in RAIDXpert2 GUI and
RAIDXpert2 Configuration Utility (HII) the legacy array disappears.
CAUTION: A legacy disk can contain valid data. When a legacy array is deleted the data is lost.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 2
Understanding Arrays, Disks and RAID Levels
31
2.8.2.1 Legacy Disk and New Disk
Table 13 provides information on how disks appear in RAIDXpert2 GUI and RAIDXpert2
Configuration Utility (HII).
Table 13. New and Legacy Disks, as They Appear in the RAIDXpert2 Configuration Utility
(HII) and RAIDXpert2
Status of the Disk
RAIDXpert2 Utility
In the BIOS Configuration
Utility/RAIDXpert2
Configuration Utility (HII)
New, un-initialized disk.
The disk appears as a new disk
with a legacy array.
When the new disk is
initialized, its state changes to
Online (or similar).
The disk appears as a new disk
(the disk can appear with a
legacy array).
When the new disk is
initialized, RAIDXpert2
configuration data is written to
the disk. The disk state changes
to Online.
A disk containing non-
RAIDXpert2 configuration
data.
CAUTION: A legacy disk can
contain valid data. When a
legacy array is deleted, or
when its corresponding legacy
disk is initialized, the data is
lost.
The disk appears as a legacy
disk with a legacy array.
When the legacy array is
deleted, the legacy array
disappears and the legacy disk
type changes to Disk. The disk
can now be used in
RAIDXpert2 arrays.
The disk appears as a legacy
disk with a legacy array.
When the legacy array is
deleted the state of the legacy
disk changes to Empty. The
disk can now be used in
RAIDXpert2 arrays.
Note: A Native AHCI installation will not boot into the OS, after changing the BIOS settings to
RAID mode.
See Chapter 6, AMD RAIDXpert2 Graphical User Interface (GUI), on page 77, for the disk
initialization procedure and the appearance of legacy disks in the BIOS Configuration Utility.
2.9 Rescanning Disks for Changes in State
The information displayed in the Disk List section is the state of the disks when they were last
scanned. If a rescan has not been performed, the information being displayed is the state of the
disks at boot time.
Every time a disk is connected or disconnected while online, a message asks if the user wants to
perform a rescan (of all SATA channels). If Rescan is selected, the information in both the Array
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
32
Understanding Arrays, Disks and RAID Levels
Chapter 2
List and the Disk List is updated. This view might show arrays as being in a Critical or Offline
state if all disks have not been installed or removed.
Although it is highly recommended that the system be shut down before adding or removing disks,
disks can be added or removed while the system is online (“hot-swapping”), if the system supports
the hot-swapping function. This is not recommended for disks that are part of the Boot Virtual
Disk or those that are connected to the AMD RAID supported chipsets.
Because of this function, RAIDXpert2 does not automatically perform a rescan when it detects
that a disk has been added or removed. For example, to hot-swap a RAID1 set with two disks into
a new system, do not perform a rescan until both disks have been connected.
Arrays associated with the disks that are not yet connected change state to either Critical or
Offline. In the example above, if the state of the RAID1 set changes to Offline, data is unavailable.
Rescanning can also result in the state of a disk being reported differently in the Array View and
the Disk List. A disk within an array can have a state of Failed in the Array View field, while at
the same time it can show a state of Online in the Disk List.
2.10 Sparing Options: Disks and Arrays
RAIDXpert2 supports multiple sparing options. Spares are restored in the order indicated in Table
14.
Table 14. Sparing Options
Option
Description
Dedicated
A spare disk assigned to a specific redundant array.
Global
A spare disk that is shared by multiple arrays.
Note: An array is marked Critical or Offline if a disk reports a Failed state to an I/O, or if the
Disk, SATA cable, or power cable is disconnected.
Note: One or more spares can be assigned to a redundant RAID level.
Note: Spare assignments do not apply to non-redundant RAID levels. To protect data, transform
the array to a redundant RAID level. Spares can then be assigned.
2.11 Dedicated Sparing
A dedicated spare is a disk that is assigned as an alternate disk for a specific array. Should a disk
fail in that array, the alternate disk is used to replace the failed disk and the array is rebuilt.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 2
Understanding Arrays, Disks and RAID Levels
33
A dedicated spare can be assigned to any redundant array type, and up to four spares can be
assigned to an array.
Note: Disk capacity of the Dedicated Spare must be greater or equal to the capacity of the
smallest disk in the array.
CAUTION: Assigning a dedicated spare does not reserve space on the disk. Therefore, an
automatic restore is not guaranteed if a disk fails. If a disk fails, make space on the
disk for the fail-over to complete, or assign a different disk with enough space. If a
dedicated spare is assigned and a disk fails, the restore process starts automatically,
if there is enough space available on the dedicated spare.
For additional information, see Section 6.4.12, Add or Remove Dedicated Spares, on page 97.
2.12 Global Sparing
A global spare is a disk that is assigned as an alternate disk for multiple arrays, instead of
associating it with only one array.
Many arrays can be restored using the global spare disk, if it is not already part of the array and it
has enough space available. Unlike a dedicated spare, this type of spare can be assigned at any
time, even while tasks are running on arrays.
Assigning a disk for use as a global spare does not reserve space on that disk. An automatic restore
is not guaranteed if a disk fails.
If there is not enough disk space on the global spare, make room for the fail-over to complete, or
assign a different disk with enough capacity as the spare. If there is enough space available on the
global spare and a disk failure occurs, the restore process starts automatically.
For additional information, see Section 6.4.13, Add or Remove Global Spares, on page 97.
2.13 RAID Performance Considerations
With RAID technology, performance is based on the following considerations:
• The number and organization of disks in an array.
• Caching attributes used for the array.
• Application workload.
• Array level verify that the array creation has completed before running any performance
testing.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
34
Understanding Arrays, Disks and RAID Levels
Chapter 2
Number and Organization of Disks
RAID functions increase performance by putting more disks to work and by buffering data for the
host.
Many disks can transfer data at greater than 100 MB per second. RAIDXpert2 can aggregate this
bandwidth in an almost linear fashion, as more of the same disks are included in an array.
Caching Attributes
Arrays can also be configured to provide Read and Write Back cache, Write Back cache, Read
Ahead cache, and No cache option with RAIDXpert2 configuration utility and WebGUI utility, if
desired. Write Back caching has a large effect on most workloads but should be used with caution.
Application Workload
When configuring an array, workload is probably the most important performance variable. Most
applications do many more reads than writes. The best performance is obtained with array types
like RAID0 or RAID10.
2.14 RAID Reliability Considerations
RAID reliability is enhanced through data redundancy and backup.
Data Redundancy
RAID1, RAID5, or RAID10 are necessary for redundancy. With redundancy, both capacity and
performance are sacrificed for reliability. With RAIDXpert2, extremely high performance is
obtained even with redundant-type arrays.
Note: RAID5 is only supported for AMD Family 17h Models 31h sTRX4 processors.
Backup
It is good practice to back up your data periodically in case of a catastrophic failure. Tape backup
or other media can be used to secure your data.
2.15 Flexibility and Expansion Considerations
Before configuring an array, consider the following points to enhance the flexibility of the RAID
system.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 2
Understanding Arrays, Disks and RAID Levels
35
2.16 Multiple RAID Levels
With RAIDXpert2, different RAID levels can be created on the same disk, to adapt each array to
the I/O that it processes. Also, more than one array can be created per disk.
Depending on the array capacity and redundancy level, an existing array can be transformed to
another RAID level, if the level of the array being used is not the optimal RAID level for the
application. Also, different arrays with different characteristics can be built for different
applications.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
36
Platform BIOS RAID Configuration Prerequisites
Chapter 3
Chapter 3 Platform BIOS RAID
Configuration Prerequisites
This chapter assists to configure and enable RAID mode in Platform BIOS for the listed AMD
products in Table 4 on page 17.
Note: Prior to starting the below procedure, Platform should be programmed with RAID
Supported BIOS. Obtain the BIOS from your system supplier or motherboard vendor.
3.1 Enable RAID for the x570/590 AMD Socket AM4-
Compatible Processors
Note: The steps to configure a system to RAID mentioned here are specific to AMD NDA BIOS
based off the AMI BIOS. The steps for other BIOS Vendors will be different.
1. Power-ON the system.
2. Press ESC to enter the System BIOS setup page.
3. In the BIOS setup:
a. Select CSM Configuration, then press Enter.
b. Set CSM Support to Enabled, then press Enter.
c. Set Boot option filter to UEFI only, then press Enter.
d. Set Storage to UEFI, then press Enter.
4. In the BIOS setup:
a. Select the Advanced tab.
b. Select FCH Common Options, then press Enter.
c. Select SATA Configuration Options, then press Enter.
d. Set SATA Enable to Enabled, then press Enter.
e. Set SATA Mode to RAID, then press Enter.
5. In the BIOS setup:
a. Select the Advanced tab.
b. Select X570/590 Chipset Common Options, then press Enter.
c. Select X570/590 Chipset SATA Configuration Options, then press Enter.
d. Set X570/590 Chipset SATA0 Enable to Enabled, then press Enter.
e. Set X570/590 Chipset SATA1 Enable to Enabled, then press Enter.
f. Set X570/590 Chipset SATA Mode to RAID, then press Enter.
6. In the BIOS setup:
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 3
Platform BIOS RAID Configuration Prerequisites
37
a. Select the Advanced tab.
b. Set NVMe RAID Mode to Enabled, then press Enter.
7. Save (F4) the settings and restart the system.
3.2 Enable RAID for the 300/400/500 AMD Socket AM4-
Compatible Processors
Note: The steps to configure a system to RAID mentioned here are specific to AMD NDA BIOS
based off the AMI BIOS. The steps for other BIOS Vendors will be different.
1. Power-ON the system.
2. Press ESC to enter the System BIOS setup page.
3. In the BIOS setup:
a. Select CSM Configuration, then press Enter.
b. Set CSM Support to Enabled, then press Enter.
c. Set Boot option filter to UEFI only, then press Enter.
d. Set Storage to UEFI, then press Enter.
4. In the BIOS setup:
a. Select the AMD-CBS.
b. Select FCH Common Options, then press Enter.
c. Select SATA Configuration Options, then press Enter.
d. Set SATA Enable to Enabled, then press Enter.
e. Set SATA Mode to RAID, then press Enter.
5. In the BIOS setup:
a. Select the AMD-CBS.
b. Select 300/400/500 Chipset Common Options, then press Enter.
c. Select 300/400/500 Chipset SATA Configuration Options, then press Enter.
d. Set PT SATA Mode to RAID, then press Enter.
6. In the BIOS setup:
a. Select the AMD-PBS tab.
b. Set NVMe RAID Mode to Enabled, then press Enter.
7. Save (F4) the settings and restart the system.
3.3 Enable RAID for the AMD SP3-Series Chipsets
Note: The steps to configure a system to RAID mentioned here are specific to AMD NDA BIOS
based off the AMI BIOS. The steps for other BIOS Vendors will be different.
1. Power-ON the system.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
38
Platform BIOS RAID Configuration Prerequisites
Chapter 3
2. Press Delete or ESC to enter the System BIOS setup page.
3. In the BIOS setup:
a. Select the Advanced tab, then press Enter.
b. Select the AMD PBS tab, then press Enter.
c. Set NVMe RAID Mode to Enabled.
4. In the BIOS setup:
a. Select the Advanced tab, then press Enter.
b. Select the AMD CBS tab, then press Enter.
c. Select FCH Common Options, then press Enter.
d. Select SATA Configuration Options, then press Enter.
e. Set SATA Controller to Enabled.
5. In the BIOS setup:
a. Select the Advanced tab, then press Enter.
b. Select the AMD CBS tab, then press Enter.
c. Select FCH Common Options, then press Enter.
d. Select SATA Configuration Options, then press Enter.
e. Set SATA Mode to RAID.
6. In the BIOS setup:
a. Select the Advanced tab, then press Enter.
b. Select Promontory Common Options, then press Enter.
c. Select PT SATA Configuration Options, then press Enter.
d. Set PT SATA Port Enable to Enabled.
7. In the BIOS setup:
a. Select the Advanced tab, then press Enter.
b. Select Promontory Common Options, then press Enter.
c. Select PT SATA Configuration Options, then press Enter.
d. Set PT SATA Mode to RAID.
8. In the BIOS setup:
a. Select the Advanced tab, then press Enter.
b. Select CSM Configuration, then press Enter.
c. Set CSM Support to Enabled.
9. In the BIOS setup:
a. Select the Advanced tab, then press Enter.
b. Select CSM Configuration, then press Enter.
c. Set Boot Option Filter to UEFI Only.
10. In the BIOS setup:
a. Select the Advanced tab, then press Enter.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 3
Platform BIOS RAID Configuration Prerequisites
39
b. Select CSM Configuration, then press Enter.
c. Set Storage > UEFI.
11. Save (F4) the setting and restart the system.
12. To proceed with RAID array creation, refer to Create Arrays.
3.4 Enable RAID for the AMD Socket AM4-Compatible
Processors
Note: The steps to configure a system to RAID mentioned here are specific to AMD NDA BIOS
based off the Insyde BIOS. The steps for other BIOS Vendors will be different.
1. Power-ON the system.
2. Press ESC to enter the System BIOS setup page.
3. Select Setup Utility, then press Enter.
4. In the BIOS setup:
a. Select the Advanced tab.
b. Select IDE Configuration, then press Enter.
c. Set SATA Configure As to RAID, then press Enter.
d. Set Force RAID Mode to Enabled, then press Enter.
5. In the BIOS setup:
a. Select the Boot tab.
b. Set Boot Type to Dual or UEFI Boot Type, then press Enter.
c. Set EFI Device First to Enable, then press Enter.
6. In the BIOS setup:
a. Select the AMD-PBS tab.
b. Set NVMe RAID Mode to Enabled, then press Enter.
7. In the BIOS setup:
a. Select the AMD-CBS tab.
b. Select SATA Configuration Options, then press Enter.
c. Set SATA Controller to Enabled, then press Enter.
d. Set SATA Mode to RAID, then press Enter.
8. In the BIOS setup:
a. Select the AMD-CBS tab.
b. Select Promontory Common Options, then press Enter.
c. Select PT SATA Configuration Options, then press Enter.
d. Set PT SATA Port Enable to Enabled, then press Enter.
e. Set PT SATA Mode to RAID, then press Enter.
9. Save (F10) the settings, then restart the system.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
40
Platform BIOS RAID Configuration Prerequisites
Chapter 3
10. RAIDXpert2 Configuration Utility (HII).
Before you begin, enable platform RAID mode by referring to Chapter 3, Platform BIOS RAID
Configuration Prerequisites, on page 36.
3.5 When to Use the RAIDXpert2 Configuration Utility
(HII)
The RAIDXpert2 Configuration Utility is also known as the HII. Use the utility to accomplish the
procedures indicated in Table 15.
Table 15. When to use the AMD-RAID RAIDXpert2 Configuration Utility (HII)
Procedure
Description
Find Information At
Initialize a new
disk
To initialize a new disk drive for
data storage.
Section 3.7, Initialize Disks, on page 41
Create Arrays
Create arrays at different RAID
levels (depending on the license
level for the system)
Section 3.8, Create Arrays, on page 42
Section 0, , on page 47
Delete Arrays
Delete an array
Section 0, , on page 47
Manage hot
spares
Allows selection of global and
dedicated hot spares.
Section 3.10, Manage Spares, on page 47
View Controller
details
View information about each
controller.
Section 3.11, View Controller Details, on page
48
Section 3.12, View Disk Details, on page 49
View Disk details
View information about each disk.
Section 3.11, View Controller Details, on page
48
View Array
details
View information about each array.
Section 3.12, View Disk Details, on page 49
Rescan all
channels
Rescan all channels to detect new
or removed disks and arrays.
Section 3.14, Rescan All Channels, on page
50
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 3
Platform BIOS RAID Configuration Prerequisites
41
3.6 Access the AMD RAIDXpert2 Configuration Utility
(HII)
AMD SP3-Series Chipsets BIOS is based on AMI BIOS. To enter the RAIDXpert2 Configuration
Utility (HII complete the following.
Note: The following step(s) is specific to AMD NDA BIOS.
1. Power ON the system.
2. Press DEL.
3. In the Menu Bar, select Advanced.
4. Select RAIDXpert2 Configuration Utility, then press Enter.
AMD Socket AM4-Compatible Processor is based on Insyde BIOS. To enter the RAIDXpert2
Configuration Utility (HII) complete the following:
1. Power ON the system.
2. Press ESC.
3. Select Device Management, then press Enter.
4. Select RAIDXpert2 Configuration Utility, then press Enter.
Note: If the BIOS Configuration Utility does not display, contact your system or motherboard
supplier.
3.7 Initialize Disks
New disks and legacy disks must be initialized before they can be used to create an AMD-RAID
array.
Initialization writes AMD-RAID configuration information (metadata) to a disk.
CAUTION: If a disk is part of an AMD-RAID array, the disk cannot be selected for initialization.
To initialize the disk anyway, delete the AMD-RAID array. Data on the disk is deleted
during initialization so ensure the correct disks are chosen to initialize.
CAUTION: A legacy disk can contain valid data. When a legacy array is deleted, all data on the
disk is lost.
1. From the RAIDXpert2 Configuration Utility’s Main Menu, use the arrow keys to select
Physical Disk Management, then press Enter.
2. Select Select Physical Disk Operations using the arrow keys, then press Enter.
3. Highlight Initialize Disk using the arrow keys, then press Enter
4. Select the disk(s) to initialize:
• To select individual disks, highlight a disk with the arrow keys and press the space
bar or Enter. Multiple disks may be selected using this method.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
42
Platform BIOS RAID Configuration Prerequisites
Chapter 3
• When the desired number are selected, use the arrow keys to select OK, then press
Enter.
• Review the warning message, if you want to proceed, use the arrow keys to select
YES, then press the Enter key, or press ESC to cancel the initialization.
Initialization takes 10 to 15 seconds per disk. During initialization, a complete rescan of all
channels is done automatically.
3.8 Create Arrays
Arrays can be created after the disks are initialized. See Section 2.2, RAID Levels, on page 24, for
deciding what type of RAID levels to use for the array.
TIP: See also Section 6.4.1, Create and Format Arrays on page 85, and Section 7.4, Create New
Arrays: rcadm --create, on page 106.
Before You Begin
• In some circumstances, more than eight arrays are possible. They might appear to function
properly but are not supported by AMD-RAIDXpert2.
• For redundant arrays the Create process starts after the operating system and AMD-RAID
OS drivers are installed and the system is booted to the operating system. However, the
arrays are immediately available to use for either a bootable array or a data array.
• Array numbers are valid only for a given boot and might be different in the RAIDXpert2
Configuration Utility (HII) and RAIDXpert2 GUI. If a permanent label is required, use the
RAIDXpert2 GUI Array Naming feature.
• At any point in the procedure return to a prior window by pressing ESC.
• If the system is booted from an AMD-RAID bootable array the first array in the Arrays
section must be the bootable array. The system boots only from the first array in the
Arrays section.
Create an Array
Before proceeding with array create and manage, System BIOS configuration should be setup as
mentioned in Chapter 3, Platform BIOS RAID Configuration Prerequisites for system RAID mode
to be enabled.
Note: The following step(s) are specific to AMD NDA BIOS. AMD SP3-Series Chipsets BIOS is
based on AMI BIOS. AMD Socket AM4-Compatible Processor is based on Insyde BIOS.
The RAIDXpert2 Configuration Utility can be used to create a bootable array with levels
Volume, Raidable, RAID0, RAID1, RAID5 and RAID10. Configure array cache and Cache
tag size settings by following the steps mentioned in the following sections.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 3
Platform BIOS RAID Configuration Prerequisites
43
Table 16. Default Cache Tag Size
Array Type
Default CTS
HDD Array
SSD Array
Mix of HDD/SSD Array
64 K
All NVMe Array
256 K
Mix of NVMe with HDD/SSD Array
256 K
Caution: Cache Tag Size for an array cannot be changed after creation.
To install the operating system and RAIDXpert2 files see Chapter 4, Software Installation, on
page 51.
3.8.2.1 Create an AMD-RAID Bootable Array
To install the operating system, AMD RAID Device driver and RAIDXpert2 GUI utility refer to
Chapter 4, Software Installation, on page 51.
CAUTION: Do not use eSATA drives for bootable arrays as they are removable.
3.8.2.2 Create a RAIDABLE Array
Note: Refer to Table 7 for RAIDABLE array characteristics.
1. From the RAIDXpert2 Configuration Utility’s Main Menu, use the arrow keys to select
Array Management, then press Enter.
2. Select Create Array using the arrow keys, then press Enter.
3. Select Select RAID Level using the arrow keys, then press Enter.
4. From the Select RAID Level Drop down menu, use the arrow keys to select RAIDABLE,
then press Enter.
5. Select the disk with which to create the array:
6. Select Physical Disks using the arrow keys, then press Enter.
7. Select an individual disk, highlight a disk using the arrow keys and press the space bar or
Enter.
• Select Apply Changes using the arrow keys, then press Enter.
Note: Refer to Table 16 on page 43 for Default Cache Tag Size.
8. Select Read Cache Policy using the arrow keys, then press Enter.
• Select the desired Read Cache Policy, then press Enter.
9. Select Write Cache Policy using the arrow keys, then press Enter.
• Select the desired Write Cache Policy, then press Enter.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
44
Platform BIOS RAID Configuration Prerequisites
Chapter 3
10. Select Create Array using the arrow keys, then press Enter.
3.8.2.3 Create a VOLUME Array
Note: Refer to Table 7 for VOLUME array characteristics
1. From the RAIDXpert2 Configuration Utility’s Main Menu, use the arrow keys to select
Array Management, then press Enter.
2. Select Create Array using the arrow keys, then press Enter.
3. Select Select RAID Level using the arrow keys, then press Enter.
• From the Select RAID Level drop-down menu, use the arrow keys to select
VOLUME, then press Enter.
4. Select the disks with which to create the array:
• Select Physical Disks using the arrow keys, then press Enter.
• Select desired disks, highlight a disk with the arrow keys and press the space bar
or Enter.
• Select Apply Changes using the arrow keys, then press Enter.
Note: Refer to Table 16 on page 43 for Default Cache Tag Size.
5. Select Read Cache Policy using the arrow keys, then press Enter.
• Select the desired Read Cache Policy, then press Enter.
6. Select Write Cache Policy using the arrow keys, then press Enter.
• Select the desired Write Cache Policy, then press Enter.
7. Select Create Array using the arrow keys, then press Enter.
3.8.2.4 Create a RAID0 Array
Note: Refer to Table 7 for RAID0 array characteristics
1. From the RAIDXpert2 Configuration Utility’s Main Menu, use the arrow keys to select
Array Management, then press Enter.
2. Select Create Array using the arrow keys, then press Enter.
3. Select Select RAID Level using the arrow keys, then press Enter.
• From the Select RAID Level drop-down menu, use the arrow keys to select
RAID0, then press Enter.
4. Select the disks to create the array:
• Select Physical Disks using the arrow keys, then press Enter.
• Select desired disks, highlight a disk with the arrow keys and press the space bar
or Enter.
• Select Apply Changes using the arrow keys, then press Enter.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 3
Platform BIOS RAID Configuration Prerequisites
45
Note: Refer to Table 16 on page 43 for Default Cache Tag Size.
5. Select Read Cache Policy using the arrow keys, then press Enter.
• Select the desired Read Cache Policy, then press Enter.
6. Select Write Cache Policy using the arrow keys, then press Enter.
• Select the desired Write Cache Policy, then press Enter.
7. Select Create Array using the arrow keys, then press Enter.
3.8.2.5 Create a RAID1 Array
Note: Refer to Table 7 for RAID1 array characteristics
1. From the RAIDXpert2 Configuration Utility’s Main Menu, select Array Management
using the arrow keys, then press Enter.
2. Select Create Array using the arrow keys, then press Enter.
3. Select Select RAID Level using the arrow keys, then press Enter.
• From the Select RAID Level drop-down menu, use the arrow keys to select
RAID1, then press Enter.
4. Select the disks to create the array:
• Select Physical Disks using the arrow keys, then press Enter.
• Select desired disks, highlight a disk with the arrow keys and press the space bar
or Enter.
• Select Apply Changes using the arrow keys, then press Enter.
Note: Refer to Table 16 on page 43 for Default Cache Tag Size.
5. Select Read Cache Policy using the arrow keys, then press Enter.
• Select the desired Read Cache Policy, then press Enter.
6. Select Write Cache Policy using the arrow keys, then press Enter.
• Select the desired Write Cache Policy, then press Enter.
7. Select Create Array using the arrow keys, then press Enter.
3.8.2.6 Create a RAID10 Array
Note: Refer to Table 7 for RAID10 array characteristics
1. From the RAIDXpert2 Configuration Utility’s Main Menu, use the arrow keys to select
Array Management, then press Enter.
2. Select Create Array using the arrow keys, then press Enter.
3. Select Select RAID Level using the arrow keys, then press Enter.
• From the Select RAID Level drop-down menu, use the arrow keys to select
RAID10, then press Enter.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
46
Platform BIOS RAID Configuration Prerequisites
Chapter 3
4. Select the disks with which to create the array:
• Select Physical Disks using the arrow keys, then press Enter.
• Select desired disks, highlight a disk with the arrow keys and press the space bar
or Enter.
• Select Apply Changes using the arrow keys, then press Enter.
Note: Refer to Table 16 on page 43 for Default Cache Tag Size.
5. Select Read Cache Policy using the arrow keys, then press Enter.
• Select the desired Read Cache Policy, then press Enter.
6. Select Write Cache Policy using the arrow keys, then press Enter.
• Select the desired Write Cache Policy, then press Enter.
7. Select Create Array using the arrow keys, then press Enter.
3.8.2.7 Create a RAID5 Array
Note: Refer to Table 7 for RAID5 array characteristics.
Note: RAID5 is only supported for AMD Family 17h Models 31h sTRX4 processors.
1. From the RAIDXpert2 Configuration Utility’s Main Menu, use the arrow keys to select
Array Management, then press Enter.
2. Select Create Array using the arrow keys, then press Enter.
3. Select Select RAID Level using the arrow keys, then press Enter.
• From the Select RAID Level drop-down menu, use the arrow keys to select
RAID5, then press Enter.
4. Select the disks to create the array:
• Select Physical Disks using the arrow keys, then press Enter.
• Select desired disks, highlight a disk with the arrow keys and press the space bar
or Enter. Select a minimum of three (3) devices for RAID5.
• Select Apply Changes using the arrow keys, then press Enter.
Note: Refer to Table 16 on page 43 for the Default Cache Tag Size.
5. Select Read Cache Policy using the arrow keys, then press Enter.
• Select the desired Read Cache Policy, then press Enter.
6. Select Write Cache Policy using the arrow keys, then press Enter.
• Select the desired Write Cache Policy, then press Enter.
7. Select Create Array using the arrow keys, then press Enter.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 3
Platform BIOS RAID Configuration Prerequisites
47
3.9 Delete Arrays
CAUTION: Deleting an array permanently destroys all the data on the array. This action cannot
be undone, and it is very unlikely the data can be recovered.
CAUTION: Do not delete the first array listed in the Arrays section if it is the AMD-RAID
bootable array. Doing this deletes the operating system and AMD-RAID files
Delete an Array
1. From the RAIDXpert2 Configuration Utility’s Main Menu, use the arrow keys to select
Array Management, then press Enter.
2. Select Delete Arrays using the arrow keys, then press Enter.
3. Select the array(s) to delete:
• Select the desired array or multiple arrays using the arrow keys, then press the
space bar or Enter to change option to Enabled for deletion.
• If you want to select all the arrays, use the arrow keys to select Check all, then
press Enter.
• Select Delete Array using the arrow keys, then press the space bar or Enter.
• To select all the arrays for deletion: use the arrow keys to select Check all, then
press the space bar or Enter.
• Review the warning message, if you want to proceed, press the space bar or Enter.
• Select Yes using the arrow keys to delete arrays or press the ESC key to exit.
3.10 Manage Spares
This option allows the user to assign or unassign global or dedicated spares.
Note: To assign a physical disk as a Global Spare, it must not be part of any Array.
Assign Global Spares
1. From the RaidXpert2 Configuration Utility’s Main Menu, use the arrow keys to select
Physical Disk Management, then press Enter.
2. Select Physical Disk Operations using the arrow keys, then press Enter.
3. Select Select Physical Disk using the arrow keys, then press Enter.
4. Select Assign Global Hot Spare using the arrow keys, then press Enter.
5. Review the warning message, if you want to proceed, use the arrow keys to select Yes, or
press ESC or No, to exit.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
48
Platform BIOS RAID Configuration Prerequisites
Chapter 3
Assign Dedicated Spares
Note: Dedicated spares can only be assigned to redundant arrays and must the same size or
larger than the other members of the redundant array.
1. From the RAIDXpert2 Configuration Utility’s Main Menu, use the arrow keys to select
Array Management, then press Enter.
2. Select Manage Array Properties using the arrow keys, then press Enter.
3. Select Select Array using the arrow keys.
• Select the desired array (must be a redundant array) from the drop-down menu,
then press Enter.
4. Select Manage Dedicated Hot Spares using the arrow keys, then press Enter.
5. Select the disks to assign as dedicated spares.
• Select the disk using the arrow keys to highlight the disk and press the space bar or
Enter to select it.
• Select Add Hot Spare Physical Disk using the arrow keys, then press Enter.
• At the warning message, press the space bar or Enter to Confirm.
• Select Yes using the arrow keys, then press Enter or press the ESC key to exit
adding the Dedicated Spare.
Unassign Spares
1. From the RAIDXpert2 Configuration Utility’s Main Menu, use the arrow keys to select
Physical Disk Management, then press Enter.
2. Select Select Physical Disk Operations using the arrow keys, then press Enter.
3. Select Select Physical Disk using the arrow keys, then press Enter.
4. From the drop-down menu, use the arrow keys to select the Global / Dedicated Spare,
then press Enter.
5. Select Unassign Hot Spare using the arrow keys, then press Enter.
6. Review the warning message, if you want to proceed select Yes, then press Enter or press
the ESC key to exit.
3.11 View Controller Details
This option will display the details about of the controllers. Nothing can be changed using this
menu option; it is for informational purposes only.
1. From the RAIDXpert2 Configuration Utility’s Main Menu, use the arrow keys to select
Controller Management, then press Enter.
2. Select Select View Controller Information using the arrow keys, then press Enter.
3. Select Select Controller using the arrow keys, then press Enter.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 3
Platform BIOS RAID Configuration Prerequisites
49
4. From the drop-down menu, select the desired controller, then press Enter. Information
about the controller is displayed below the Select Controller header:
• PCI ID
• Controller Physical Disk Count
• Total Physical Disk Count
• Total Array Count
• UEFI Driver Version
• Firmware Properties/Firmware Build Time
5. To view another controller, press Enter and from the drop-down menu, select a different
controller, then press Enter.
6. Press ESC to exit to the Main Menu.
3.12 View Disk Details
This option allows the user to view details about the physical disk(s). Nothing can be changed
using this menu option; it is for informational purposes only.
1. From the RAIDXpert2 Configuration Utility’s Main Menu, use the arrow keys to highlight
Physical Disk Management, then press Enter.
2. Select View Physical Disk Properties using the arrow keys, then press Enter.
3. Select Select Physical Disk using the arrow keys, then press Enter.
4. From the drop-down menu, select the physical disk you want more information about, then
press Enter.
5. Information about the physical disk is displayed below the Select Physical Disk header:
• Unique Disk ID
• State
• Size
• Smart Status
• Revision
• Drive Type
• Maximum Free Space
• Used Space
• Disk Protocol
• Disk Speed
• Associated Array, if part of one
• Serial Number
• Model Number
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
50
Platform BIOS RAID Configuration Prerequisites
Chapter 3
6. To view another physical disk, press Enter and from the drop-down menu, select a
different physical disk, then press Enter.
7. Press ESC to exit to the Main Menu.
3.13 View Array Details
This option will display the details of an array. Nothing can be changed using this menu option; it
is for informational purposes only.
1. From the RAIDXpert2 Configuration Utility’s Main Menu, use the arrow keys to select
Array Management, then press Enter.
2. Select Select Manage Array Properties using the arrow keys, then press Enter.
3. Select Select Array using the arrow keys, then press Enter.
4. From the drop-down menu, select the desired array, then press Enter.
5. Select View Associated Physical Disks using the arrow keys, then press Enter
6. Press the space bar to select one of the members of the Array
7. Select View Physical Disk Properties using the arrow keys, then press Enter
8. Information about the array is displayed below the Select Array header:
• Array number
• RAID level
• State (see Table 8)
• Size
• Cache Tag Size
• Cache settings
• Associated physical disks
9. To view another array, press ESC twice and perform steps 2 through 8 again.
10. Press ESC to exit to the Main Menu.
3.14 Rescan All Channels
This option allows the user to rescan all channels to detect new or removed disks and arrays. It
rereads the configuration information from each disk.
Sometimes when a disk is offline, it can be brought online through a rescan.
1. From the RAIDXpert2 Configuration Utility’s Main Menu, use the arrow keys to select
Controller Management, then press Enter.
2. Select Rescan Disks using the arrow keys, then press Enter.
• After a rescan completes, all of the physical disks are displayed.
3. Select OK using the arrow keys, then press Enter.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 4
Software Installation
51
Chapter 4 Software Installation
This chapter is designed to assist you with installation of Operating systems, by performing these
general procedures:
4.1 System Setup Process Overview
A generic system setup process follows these steps:
1. Copy the AMD-RAID drivers to a removable storage medium.
2. Power ON the system.
3. To enable RAID refer to Chapter 3, Platform BIOS RAID Configuration Prerequisites, on
page 36. (This enables the loading of the AMD-RAID Option-ROM and or AMD-RAID
UEFI driver).
4. Initialize the disks using the AMD-RAID Array Configuration Utility (HII) or AMD-
RAID Option-ROM.
5. Create arrays using the AMD-RAID Array Configuration Utility (HII) or AMD-RAID
Option-ROM.
6. Install the AMD-RAID drivers on the system.
7. Load the operating system.
8. Install the OS RAID Management Suite (AMD RAIDXpert2) on the system.
Note: To protect your data, always perform a backup prior to installing any new, major hardware
or software.
4.2 Before You Begin
Have the Windows
®
or Linux
®
operating system software available and ready to install.
4.3 Copying AMD-RAID Drivers to Removable Storage
Copy the drivers to a removable storage medium before starting the installation.
Copying AMD-RAID Drivers in a Microsoft
®
Windows
®
Environment
1. Power ON the system.
2. Locate and use a system that is running a Windows operating system and has a CD DVD
drive or an I/O port for removable storage media (such as a USB flash drive).
3. Go to a browser and access the web site of your system supplier or motherboard vendor.
4. Insert the storage medium into the system:
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
52
Software Installation
Chapter 4
• Connect a USB flash drive to a USB I/O port or insert a blank CD-DVD disk into
the applicable drive.
5. Download the AMD-RAID drivers from the web site to the appropriate removable storage
medium.
Copying AMD-RAID Drivers in a Linux
®
Environment
1. Power ON the system.
2. Locate and use a system that is running a Windows operating system and has a USB I/O
port for the USB flash drive.
3. Use a browser to access the web site of your system supplier or motherboard vendor.
4. Insert a USB flash drive into the USB I/O port of the system.
5. Download the AMD-RAID drivers for the correct distribution version of Linux
®
. Copy the
drivers onto the USB flash drive:
• For Red Hat Linux: Copy the .iso image file (that matches the applicable
distribution of Linux to the USB flash drive . For example:
dd-rcraid-RHEL8-4-18.0-193.el8.x86_64.iso
• For Ubuntu: Copy the driver files contained inside the dd-rcraid-Ubuntu [Ubuntu
version number].w.x-yz-folder into a dd directory located on a root path of the USB
flash drive. For example:
dd
• load_amdraid
• post_install
• post_install2
• pre_install
• rcraid.ko
• rcraid_generic.ko
• readme
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 4
Software Installation
53
4.4 Installing AMD-RAID Drivers
Follow the procedures below for Pre-install of AMD RAID Driver during Installation of your
Microsoft Windows or Linux
®
Operating System.
Installing AMD-RAID Drivers While Installing Microsoft
®
Windows
®
Note: The windows described in this procedure are typical. Path names and text can vary,
depending on user-designated selections and other parameters.
Note: NVMe devices are listed in the “Where do you want to install Windows?” do not delete any
of the partitions or format the devices. Doing so will delete the AMD-RAID metadata and
the desired RAID level will be deleted. After AMD-RAID drivers have been loaded, a valid
AMD-RAID Virtual Disk appears.
Note: If a user wants to add or remove a NVMe into a system; it is AMD’s recommendation that a
reset of the system is performed, wait for the BIOS screen to appear, then power off the
system and add or remove the NVMe(s).
1. Power ON the system.
2. Create a bootable array, refer to Section 3.8, Create Arrays, on page 42.
3. Insert the Microsoft Windows operating system media/disk into the system’s Optical drive.
4. Boot the system and allow it to access the Microsoft Windows operating system
installation media/disk.
5. At the Windows setup window:
a. Select the language, time, and keyboard options
b. Click Next.
c. Click Install Now or similar.
d. If prompted, select the desired Operating System.
e. Click Next.
f. Depending on the installation window observed, choose one of the methods below to
load rcbottom.inf.
g. If the window observed is Select driver to install:
i. Insert the storage medium with the AMD-RAID drivers into the USB port or
applicable system drive.
ii. Click Browse.
iii. Navigate to the directory containing the saved AMD-RAID drivers.
iv. Click OK.
v. Select the first rcbottom.inf driver in the list.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
54
Software Installation
Chapter 4
vi. Click Next.
Note: If the installation has multiple controllers, there will be two or more rcbottom.inf’s
listed, installation of rcbottom.inf is recommended only once.
h. Else follow onscreen prompt until Where to install Windows? window observed:
i. Select Load driver.
ii. Click Browse.
iii. Navigate to the directory containing the saved AMD-RAID drivers.
iv. Click OK.
v. Select the first rcbottom.inf driver in the list.
vi. Click Next.
6. At the Load Driver window:
a. Click OK.
b. Click Browse.
c. Navigate to the directory containing the saved AMD-RAID drivers.
d. Click OK.
e. Select the rcraid.inf driver from the list.
f. Click Next.
7. Select (Check Mark) the I Accept the License Terms.
a. Click Next.
b. Select Custom: Install Windows Only (advanced) or similar.
8. After both the rcbottom and rcraid drivers have been loaded, a valid Virtual disk appears
in Where do you want to install Windows? window:
a. Click Load Drivers.
b. Click Browse.
c. Navigate to the directory containing the saved AMD-RAID drivers.
d. Click OK.
e. Select the rccfg.inf driver in the list.
f. Click Next.
g. At the Where do you want to install Windows, click Next.
9. Follow the on-screen instructions to complete the installation of the applicable Windows
operating system.
10. After the OS is installed, open Device Manager and verify the following:
a. Expand Storage Controllers: there are entry(ies) listed as AMD-RAID Bottom Device.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 4
Software Installation
55
b. Expand Storage Controllers: there are entry(ies) listed as AMD-RAID Controller.
c. Expand System Devices: there is an entry listed as AMD-RAID Config Device.
11.
Remove the storage medium and Microsoft Windows OS CD-ROM or DVD from the
applicable drive(s) or port. Proceed to Section 4.4.2, Windows – AMD-RAIDXpert2
Management Suite Desktop Application (Microsoft Store), on page 55
Installing the AMD RAIDXpert2 Management Suite for Microsoft
®
Windows
®
Install this software using one of the following:
• From the Microsoft Store at https://www.microsoft.com/store/apps.
• From the AMD support web site at https://support.AMD.com.
Windows – AMD-RAIDXpert2 Management Suite Desktop
Application (Microsoft Store)
1. Go to the Microsoft Store at https://www.microsoft.com/store/apps.
2. Select Search, type AMD-RAIDXpert2, and select the AMD-RAIDXpert2 Management
Suite Desktop Application from the search results.
3. Select Get.
4. Sign in with your Microsoft account to finish downloading the application.
5. After the RAIDXpert2 software installation is completed, open the Windows menu and
search for AMD RAIDXpert2, then click Open.
Windows – AMD-RAIDXpert2 Management Suite
The procedures in this section describe how to install the software from the AMD support website.
1. Obtain the latest executable file from your system supplier, motherboard vendor, or from
https://www.amd.com/support.
2. Download the file to the system’s desktop, run it and follow the on-screen prompts.
3. Double-click the RAIDXpert2 desktop icon.
Windows – AMD RAIDXpert2 Management Suite Installation
Desktop Application (Manual Install)
Note: AMD RAIDXpert2 Management Suite installation default is a Silent installation.
1. Obtain the AMD RAIDXpert2 Management Suite executable file (setup.exe) from
your system supplier or motherboard vendor. Download Setup.exe to the system’s
desktop.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
56
Software Installation
Chapter 4
2. Install AMD RAIDXpert2 (setup.exe).
3. Open a command prompt, with the Run as Administrator option.
4. Type cd C:\User\User_Name\Desktop.
• For silent installation: setup.exe
• For GUI installation: setup.exe -i gui
5. Turn off the Windows Firewall (or unblock during step 2).
6. Click on the RAIDXpert2 Desktop icon.
See Section 6.1 page 77 for more information.
4.5 Installing AMD-RAID Drivers While Installing
Linux
®
Operating System
Note: The Linux
®
operating system modules must include the gcc+ compiler and the pthreads
library so that the rcadm program can be installed properly.
Install the AMD-RAID drivers during an Ubuntu Desktop Linux
Installation
Note: Prior to starting this procedure, obtain the AMD-RAID drivers from your system supplier or
motherboard vendor.
• Copy the AMD-RAID drivers to a dd directory on a USB flash drive formatted as FAT32.
See Copy AMD-RAID drivers: Linux.
Note: The Ubuntu driver CD-ROM .iso image contains all Linux variations for a release.
Note: Not all of the windows indicated in this procedure will appear during the installation.
Note: If a user wants to add or remove a NVMe into a system; it is AMD’s recommendation that a
reset of the system is performed. Wait for the BIOS screen to appear, then power off the
system and add or remove the NVMe(s).
1. Power ON the system.
2. To prevent the system from updating, remove the Ethernet Cable from the system.
Reinstall the Ethernet Cable after the update.
3. Insert the Ubuntu Desktop Linux operating system CD-ROM or DVD into the system’s
CD or DVD drive.
4. Boot to the Ubuntu Desktop CD-ROM, DVD or USB Flash drive, this will bring you to the
GNU Grub Window.
• Press the down arrow to Ubuntu or similar.
• Press the E key.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 4
Software Installation
57
At the end of the Boot Options linux string, add the following:
break=mount modprobe.blacklist=ahci,nvme
Note: The string should look like the following: Due to some video cards being different,
there may be some variation in the string.
splash --- break=mount modprobe.blacklist=ahci,nvme
• Press F10
Note: If the BusyBox shell doesn’t appear (the screen is black) reset the system and try with
the following settings:
• Type: break=mount modprobe.blacklist=ahci,nvme nomodeset
Note: The string should look like the following:
splash --- break=mount modprobe.blacklist=ahci,nvme nomodeset
• Press F10
5. Complete the following when the BusyBox shell displays:
• Insert the USB flash drive.
• Type: mount -t vfat /dev/sdb1 /tmp
Note: /dev/sdb1 may need to be changed to /dev/sdc1 or /dev/sdd1…depending on the
number of devices. Enter - ls /dev/sd*, this will list the possible entries.
• Type: cp -ap /tmp/dd /
• Type: /dd/pre_install (Wait for the install to complete, this may take some
time.)
• unmount /tmp
• Type: Exit
• Remove the USB flash drive
6. Wait for the Welcome screen to load. Goes to different screen on the new install 20.04
something like for 20.04 this will load.
Note: If the Welcome screen doesn’t open but the Ubuntu Desktop displays with the Install
Ubuntu icon available, double-click on Install Ubuntu Desktop icon.
7. Click Ubuntu.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
58
Software Installation
Chapter 4
8. Select the desired Language from the Keyboard layout window and click Continue.
9. Select Normal Installation from the Updates and Other Software window and click
Continue.
10. Select Erase Disk and Install Ubuntu from the Installation Type window and click
Install Now.
11. Select the drive from the Erase disk and install Ubundu screen and click Continue or
Install Now. Write Changes to Disks? window.
12. Select the desired Time Zone and click Continue.
13. Enter valid entries for Who are you? with the following:
• Your name
• Computer name
• Username
• Password
• Confirm Password
• Click Continue
14. When the Installation Complete window displays, complete the following:
• Press CTRL+ALT+F2
• From the Ubuntu Login prompt, enter ubuntu, then press Enter
Note: If asked for a password, press Enter, without entering a password.
• Insert the USB flash drive used in a previous step
• Enter: sudo mount -t vfat /dev/sdb1 /mnt
Note: /dev/sdb1 may need to be changed to /dev/sdc1 or /dev/sdd1…depending on the
number of devices. Enter - ls /dev/sd*, this will list the possible entries.
• Enter: sudo cp -ap /mnt/dd /
• Enter: sudo /dd/post_install
15. Wait for the message Setup is Complete, press CTRL+ALT+F1, click Restart Now to
finish the installation.
16. Remove the installation media:
• If prompted, remove the CD/DVD or DVD and USB flash drive
• When installation media is removed, press Enter or Reboot the system
17. Reconnect the Ethernet Cable.
Install the AMD-RAIDXpert2 Management Application
1. Contact your system supplier or motherboard vendor to obtain the new AMD-RAID Linux
Management Application.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 4
Software Installation
59
2. Copy the AMD-RAID 9.3.0-00xxx_linux_raidxpert2.tgz to a USB flash drive.
3. Insert a USB flash drive containing the AMD-RAID 9.3.0-00xxx_linux_raidxpert2.tgz
package.
4. Click Files
• Select the USB that was inserted above
• Locate and select the AMD-RAID 9.3.0-00xxx_linux_raidxpert2.tgz package and
drag it to the /home directory on your desktop.
• Right-click to open the Terminal or click the Terminal icon.
• Enter sudo tar xzvf 9.3.0-00xxx_linux_raidxpert2.tgz -C /opt.
5. To open the AMD RAIDXpert2 Management Application:
• Enter cd /opt/raidxpert2/bin.
• Enter ./RAIDXpert2 &.
Install the AMD RAID Drivers During a RHEL Linux Installation
Note: Prior to starting this procedure, obtain the AMD-RAID drivers from your system supplier or
motherboard vendor.
• Copy the AMD-RAID drivers to a USB flash drive
• See Copy AMD-RAID drivers: Linux
Note: When installing Red Hat Linux, use the Linux dd installation mode instead of the Linux
expert mode.
Note: Not all of the windows indicated in this procedure will display during installation.
Note: If a user wants to add or remove a NVMe into a system; it is AMD’s recommendation that a
reset of the system is performed, wait for the BIOS screen to appear, then power off the
system and add or remove the NVMe(s).
1. Power-ON the system
2. Insert the Red Hat installation CD-ROM, DVD or USB.
3. Create a bootable array, see Section 3.8.2.1 page 43
4. At the Red Hat Enterprise Linux Welcome window:
• Press the Up Arrow.
• Select Install Red Hat Enterprise Linux 8.x (the text should be high-lighted in
white).
• Press E.
• Press the down arrow twice and select the linuxefi /images string.
• Press the END key.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
60
Software Installation
Chapter 4
• Add “inst.dd modprobe.blacklist=ahci modprobe.blacklist=nvme”
to the end of the string.
Example: linuxefi /images……quiet inst.dd modprobe.blacklist=ahci
modprobe.blacklist=nvme.
• Press CTRL X.
Note: If the shell doesn’t display (the screen is black) reset the system and try with the
following settings:
• Add inst.dd modprobe.blacklist=ahci modprobe.blacklist=nvme
nomodeset to the end of the string:
Example: linuxefi /images……quiet inst.dd modprobe.blacklist=ahci
modprobe.blacklist=nvme nomodeset
• Press CTRL X.
5. At the Driver Disk Device Selection:
• Insert the USB drive (which contains the AMD-RAID dd-rcraid….x86_64.iso)
into the USB port.
• Press r.
• Press Enter to refresh.
• Press X (x representing the number of USB flash drives inserted previously.
• Press Enter.
6. At the Choose Driver Disk ISO file:
• Press 1 – number of the dd-rcraid-RHEL….el8.x86_64.iso entry.
• Press Enter.
7. At the Select Drivers to Install:
• Press 1 – number of the /media/DD/….x86_64.rpm entry.
• Press Enter.
The /media/DD/…is now selected and should look like [X]
/media/DD/…..x86_64.rpm.
• Press c.
• Press Enter.
8. At the Driver Disk Device Selection:
• Press c.
• Press Enter.
• Remove the USB flash drive.
9. At the Welcome to Red Hat Enterprise Linux screen:
• Choose the desired Language.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 4
Software Installation
61
• Choose the desired Country.
• In the bottom-right corner, click Continue.
10. At the Installation Summary screen, configure the following:
• Under Localization:
• Keyboard
• Language Support
• Time and Date
• Under Software:
• Software Selection
• Under Base Environments
• Select Server with GUI
• In the upper-left corner, click Done
• Under System:
• Installation Destination
• Under Local Standard Disks.
• Select AMD-RAID Array 01.
• Under Storage Configuration.
• Select Custom.
• In the upper-left corner, click Done.
• Click the Click here to create them automatically link.
Note: AMD-RAID only supports a file system type of ext4, using the XFS file system
will cause an unrecoverable installation error.
• Under Installation:
• Select DATA/home.
• Change File System from xfs to ext4.
• Select SYSTEM/rhel-root.
• Change File System from xfs to ext4.
• Select SYSTEM/boot.
• Change File System from xfs to ext4.
• In the upper-left corner, click Done.
• In the Summary of Changes window, click Accept Changes.
• Under Network and Hostname.
• In the bottom-left corner, enter a valid Hostname, the press the Apply button.
• Select an Ethernet Port.
• In the bottom-right corner, click Configure.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
62
Software Installation
Chapter 4
• Enter valid entries.
• Click Save.
• Under Ethernet, click the ON button.
• In the upper-left corner, Click Done.
11. In the bottom-right corner, click Beginning Installation.
12. At the Configuration window:
• Click Root Password
• Enter an applicable root password
• Re-enter the root password
• In the upper-left corner, click Done
• Click User Creation
• Enter a Full Name
• Enter a Username
• Enter an applicable password
• Re-enter the user password
• In the upper-right corner, click Done
Note: Wait for the “Red Hat Enterprise Linux is now successfully installed and ready
for you to use! Go ahead and reboot to start using it!” to appear
• In the bottom-right corner, click Reboot
• Remove the installation media
13. At the Initial Setup window
• Under Licensing
• Click License Information
• Review the EULA and select (check mark) I accept the License Agreement
• In the upper-left corner, click Done
• Under System
• Configure Subscription Manager
• In the bottom-right corner, click Finish Configuration
14. Login to the system
• Select a user
• Enter a password
15. At the Welcome window
• Select the desired Language
• Click Next
16. At the Typing window
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 4
Software Installation
63
• Select the desired Language
• Click Next
17. If desired, configure Privacy
• Click Next
18. At the Connect your Online Accounts
• Configure or click Skip
19. Click Start using the Red Hat Enterprise Linux Server
Install the RAIDXpert2 Management Application
1. Contact your system supplier or motherboard vendor to obtain the new AMD-RAID Linux
Management Application.
2. Copy the AMD-RAID 9.3.0-00xxx_linux_raidxpert2.tgz to a USB flash drive.
3. Insert a USB flash drive, formatted as FAT32.
4. Log into the system as root or su root.
5. Click Activities->Files and select the USB flash drive inserted previously.
6. Locate and select the AMD-RAID 9.3.0-00xxx_linux_raidxpert2.tgz package and drag it to
/home on your desktop.
7. Click Activities->Terminal to open a terminal / console window.
8. Enter tar xzvf 9.3.0-00xxx_linux_raidxpert2.tgz -C /opt.
9. To open the AMD-RAID RAIDXpert2 Management Application:
• Click Activities->Terminal to open a terminal / console window.
• Enter cd /opt/raidxpert2/bin.
• Enter ./RAIDXpert2 &.
Note: “Cannot Open Display”Error While Launching RAIDXpert2 on RHEL 8.x. When
the latest RAIDXpert2 Management Utility is executed, you may receive an error
that looks like: qt.qpa.xcb: could not connect to display :0
RHEL requires elevated permissions to run the program, use the following commands to
create temporary elevated session permission:
• Open a terminal window to allow clients to connect from any host using xhost+.
• The following commands must be entered as a non-root user:
Enter the following command: xhost+
access control disabled, clients can connect from any host
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
64
Software Installation
Chapter 4
This will grant the user temporary elevated permissions to run the program. Please note,
once you reboot or update the program, you will have to re-enter these commands to
regrant yourself these permissions.
Install the AMD-RAID drivers during a Debian Linux Installation
Note: Prior to starting this procedure, obtain the AMD-RAID drivers from your system supplier or
motherboard vendor.
• Copy the AMD-RAID drivers to the dd directory on a USB flash drive.
• See Copy AMD-RAID drivers: Linux.
Note: The Debian driver CD-ROM .iso image contains all Linux variations for a release.
Note: Not all the windows indicated in this procedure will appear during the installation.
Note: If a user wants to add or remove a NVMe into a system; it is AMD’s recommendation that a
reset of the system is performed, wait for the BIOS screen to appear, then power off the
system and add or remove the NVMe(s).
1. Power-ON the system.
2. Insert the Debian Linux operating system CD-ROM, DVD or USB Flash drive into the system.
3. Boot to the Debian CD-ROM, DVD or USB Flash drive, this will bring you to the GNU
GRUB Window
• Select Graphical Install
• Press the E key
Press the down arrow to the Linux /install….quiet entry
• Press the END key
• Add the following linux string: modprobe.blacklist=ahci,nvme
Note: The string should look like: --- quite
modprobe.blacklist=ahci,nvme
• Press F10
4. At the Debian installer main menu
• Press CTRL ALT F2
• At the Please press Enter to activate this console, press Enter
• Insert the USB flash drive that contains the AMD-RAID Debian driver
• Type: mount –t vfat /dev/sdb1 /tmp
Note: /dev/sdb1 may need to be changed to /dev/sdc1 or /dev/sdd1…depending on the
number of devices. Enter - ls /dev/sd*, this will list the possible entries.
• Type: cp –ap /tmp/dd /
• Type: /dd/pre_install
• Type: umount /tmp
• Type: exit
• Remove the USB flash drive
• Press CTRL ATL F5
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 4
Software Installation
65
5. From the Debian Select a Language window
• Select the desired Language, then click Continue
• Select the desired Location, then click Continue
• Configure the keyboard, then click Continue
• Select the desired network, configure, then click Continue
6. Enter a valid Hostname, then click Continue
• Enter a valid Root password
• Re-enter a valid password, then click Continue
• Enter a Full name for the New User, then click Continue
• If Username for your account is acceptable, then click Continue
• Enter a valid New User password
• Re-enter the New User password, then click Continue
• Select the desired Time Zone, then click Continue
7. At the partition disk, force UEFI installation, select Yes, then click Continue
• At the partition disk, Partitioning method, select Guided – use entire disk, then click
Continue
• At the partition disks, Select disk to partition, select the AMD-RAID Array, then click
Continue
• At the partition disks, Partitioning scheme, select the All files in one partition
(recommended for new users), then click Continue
• At the partition disks, select Finish partitioning and write changes to disk, then click
Continue
• At the partition disks, Write changes to disks?, select Yes, then click Continue
8. At the Configure the package manager window, Use a network mirror?, select Yes, then
click Continue
• At the Configure the package manager, Debian archive mirror country, select the
desired Country, the click Continue
• At the Configure the package manager, Debian archive mirror;, select a mirror, then
click Continue
• At the Configure the package manager, HTTP proxy information, enter an address or
leave blank, the click Continue
• At the Configuring popularity-contest, Select Yes or No, then click Continue
• At the Software selection, select the desired additional packages, then click Continue
9. When the “Finish the Installation” window appears, then do the following:
• Press CTRL+ALT+F2
• At the Please press Enter to activate this console, press Enter
• Enter: /dd/post_install
• Wait for the Setup is Complete
• Press CTRL+ALT+F5
• Click Continue, to finish the installation.
• Remove the installation media.
Note: The Debian installation may not work with the latest gpu’s. After the installation and
reboot, the system starts to boot but never boots to the desktop.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
66
Software Installation
Chapter 4
The following steps are for installing the AMD Linux graphics drivers:
1. Go to support.amd.com and download the AMD Linux graphics tar file and copy it to a USB
flash drive.
2. At the blinking cursor in the upper right corner:
a. Press CTRL ALT F2
b. Enter: root, then press Enter
c. Enter the root password, then press Enter
d. Insert the flash drive with the AMD tar file on it.
e. Mount the flash drive and copy AMD Linux graphics tar file to the test system
f. umount the flash drive
g. Enter: vi /etc/apt/sources.list
h. Add a # at the beginning of the deb cdrom line, to comment it out, then save (:wq) and
exit
i. Enter: apt update
j. Enter: apt install dkms -y
k. Enter: cd /
l. Enter: tar xvf amdgpu….. /
m. Enter: cd amdgpu…, then press Enter
n. Enter: dpkg -i amdgpu-core_..... amdgpu-dkms_...., then press Enter
3. Wait for the command to complete, then reboot the system
Install the AMD-RAIDXpert2 Management Application
Contact your system supplier or motherboard vendor to obtain the new AMD-RAID Linux
Management Application.
1. Copy the AMD-RAID 9.3.0-00xxx_linux_raidxpert2.tgz to a USB flash drive.
2. Insert a USB flash drive containing the AMD-RAID 9.3.0-00xxx_linux_raidxpert2.tgz
package.
3. Click Files/File Manager or similar
• Select the USB that was inserted above
• Locate and select the AMD-RAID 9.3.0-00xxx_linux_raidxpert2.tgz package and drag it to
the /home section
4. Install the AMD RAIDXpert2 Management Application
• Click the Terminal icon
• Enter - su – root, then press Enter
• Enter the password for the root account, then press Enter
• Change directories to the location of the AMD-RAID 9.3.0-00xxx_linux_raidxpert2.tgz
package (cd /home/newuser
• Enter – tar xvzf 9.3.0-00xxx_linux_raidxpert2.tgz -C /opt
5. To open the AMD-RAID RAIDXpert2 Management Application
• Click the Terminal icon
• Enter – cd /opt/raidxpert2/bin
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 4
Software Installation
67
• Enter – ./RAIDXpert2 &
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
68
RAID Software Update
Chapter 5
Chapter 5 RAID Software Update
5.1 Purpose
This chapter describes the steps needed to update the AMD-RAID drivers installed on the
following Operating Systems:
• Microsoft Windows 10 64 bit
• Ubuntu Desktop Linux 20.04 64 bit
• Red Hat Enterprise Linux (RHEL) 8.x
• Debian 10.3 64 bit
5.2 System Overview Process
A generic System update process is described below.
1. Backup the user data before doing any upgrade.
2. Power-ON the system.
3. Log into the system.
4. Copy the AMD RAIDXpert2 Installer to the Systems Desktop.
• Windows – Latest package from AMD (https://www.amd.com/support) – See 1.1 on
page16.
• Windows – Manual install, use Setup.exe – See Section 1.2 on page 16.
Linux – Setup.sh
5. Run the AMD RAIDXpert2 Installer to update the AMD RAIDXpert2 Management Suite.
6. Update the AMD-RAID OS drivers.
7. Restart the System.
IMPORTANT: To protect your data; always perform a backup prior to installing any new, major
hardware or software. If you are adding NVMe as RAID to your existing AMD-
RAID arrays, update all the existing AMD-RAID controller drivers to the latest
version and restart the system. Then connect the NVMe devices and install the
AMD-RAID driver onto NVMe devices.
5.3 Updating the AMD RAIDXpert2 Management Suite.
The following sections will give you information on updating AMD RAIDXpert2 Management
Suite.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 5
RAID Software Update
69
AMD RAIDXpert2 UWP Management Suite
If you have the AMD-RAIDXPert2 UWP Management Suite installed, when a new version is
release to the Microsoft store, it will be pushed to the system and automatically updated.
5.3.1.1 Windows – AMD-RAIDXpert2 Management Suite Desktop Application
(Microsoft Store Manual Update)
1. Go to the Microsoft Store at https://www.microsoft.com/store/apps.
2. Select Search, type AMD-RAIDXpert2, and select the AMD-RAIDXpert2 Management
Suite Desktop Application from the search results.
3. Select Get.
4. Sign in with your Microsoft account to finish downloading the application.
5. After the RAIDXpert2 software installation is completed, click on the RAIDXpert2
Desktop icon.
6. Re-log into the system with the new credentials.
Update the AMD RAIDXpert2 Management Application (GUI)—
AMD RAID Installer
To update the AMD RAIDXpert2 Management Application AMD RAID Installer, complete the
following:
1. Backup the user data before doing any upgrade.
2. Power-ON the system.
3. Obtain the latest AMD RAID Installer executable file from your system supplier or
motherboard vendor. Download the file to the Systems Desktop and execute it. Follow the
on-screen prompts.
5.3.2.1 Update the AMD RAIDXpert2 Management Application (GUI)—Manually
1. Backup the user data before doing any upgrade.
2. Open a browser and access the Web Site of your system supplier or motherboard vendor.
3. Download the AMD RAIDXpert2 Installer (setup.exe) from the web site and copy it to the
Systems Desktop.
4. Open a Command Prompt terminal
Enter: cd \Users\user_name\Desktop
Enter: setup.exe
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
70
RAID Software Update
Chapter 5
Ubuntu – Update the AMD-RAIDXpert2 Management Application
Contact your system supplier or motherboard vendor to obtain the new AMD-RAID Linux
Management Application.
1. Copy the AMD-RAID 9.3.0-00xxx_linux_raidxpert2.tgz package and drag it to the /home
directory on your desktop.
2. Insert a USB flash drive containing the AMD-RAID 9.3.0-00xxx_linux_raidxpert2.tgz
package.
3. Click Files.
• Select the USB that was inserted in the previous step
• Locate and select the AMD-RAID 9.3.0-00xxx_linux_raidxpert2.tgz package and
drag it to the /home section
4. Install the AMD RAIDXpert2 Management Application
• Right-click on the Terminal or click the Terminal icon
• Enter sudo tar xzvf 9.3.0-00xxx_linux_raidxpert2.tgz -C /opt
5. To open the AMD-RAID RAIDXpert2 Management Application
• Click the Terminal icon
• Enter cd/opt/raidxpert2/bin
• Enter ./RAIDXpert2 &
RHEL - Update the AMD-RAIDXpert2 Management Application
Contact your system supplier or motherboard vendor to obtain the new AMD-RAID Linux
Management Application.
1. Copy the AMD-RAID 9.3.0-00xxx_linux_raidxpert2.tgz to a USB flash drive.
2. Insert a USB flash drive containing the AMD-RAID 9.3.0-00xxx_linux_raidxpert2.tgz
package.
3. Log into the system as root or su root.
4. Click Activities->Files and select the USB flash drive inserted previously.
5. Locate and select the AMD-RAID 9.3.0-00xxx_linux_raidxpert2.tgz package and drag it to
the /home section.
6. Enter tar xzvf 9.3.0-00xxx_linux_raidxpert2.tgz -C /opt.
7. Click Activities->Terminal to open a terminal / console window.
8. Enter cd /opt/raidxpert2/bin.
9. Enter ./RAIDXpert2 &.
Note: “Cannot Open Display” Error While Launching RAIDXpert2 on RHEL 8.x. When the latest
RAIDXpert2 Management Utility is executed, you may receive an error that looks like:
qt.qpa.xcb: could not connect to display :0
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 5
RAID Software Update
71
RHEL requires elevated permissions to run the program, use the following commands to
create temporary elevated session permission:
• Open a terminal window to allow clients to connect from any host using xhost+.
• The following commands must be entered as a non-root user:
Enter the following command: xhost+
access control disabled, clients can connect from any host
This will grant the user temporary elevated permissions to run the program. Please note,
once you reboot or update the program, you will have to re-enter these commands to
regrant yourself these permissions.
Debian – Update the AMD-RAIDXpert2 Management Application
Contact your system supplier or motherboard vendor to obtain the new AMD-RAID Linux
Management Application.
1. Copy the AMD-RAID 9.3.0-00xxx_linux_raidxpert2.tgz to a USB flash drive.
2. Insert a USB flash drive containing the AMD-RAID 9.3.0-00xxx_linux_raidxpert2.tgz
package.
3. Click Files/File Manager or similar
• Select the USB that was inserted above
• Locate and select the AMD-RAID 9.3.0-00xxx_linux_raidxpert2.tgz package and drag it to
the /home section
4. Install the AMD RAIDXpert2 Management Application
• Click the Terminal icon
• Enter - su – root, then press Enter
• Enter the password for the root account, then press Enter
• Change directories to the location of the AMD-RAID 9.3.0-00xxx_linux_raidxpert2.tgz
package (cd /home/newuser
• Enter – tar xzvf 9.3.0-00xxx_linux_raidxpert2.tgz -C /opt.
5. To open the AMD-RAID RAIDXpert2 Management Application
• Click the Terminal icon.
• Enter –cd /opt/raidxpert2/bin
• Enter – ./RAIDXpert2 &.
5.4 Updating the AMD-RAID OS Drivers – SOC and
AMD 300-Series Chipset
Windows—AMD RAID Installer
Contact your system supplier or motherboard vendor to obtain the new AMD-RAID Windows
Installer.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
72
RAID Software Update
Chapter 5
1. Unzip the AMD RAID installer and execute AMD_RAID_Software.exe or similar. Wait
for the installer to load.
2. Agree to the Terms and Conditions.
3. Click Install. Wait for the installer to complete.
4. Click Restart now to reset the computer and load the new drivers.
Windows 10—Manually
1. Backup the user data before doing any upgrade.
2. Open a browser and access the Web Site of your system supplier or motherboard vendor.
3. Download the AMD-RAID Drivers from the Web Site and copy it to the Systems C:
drive.
4. Open Computer Management -> Device Manager.
5. Expand Storage Controllers.
6. Select the first AMD-RAID Bottom Device:
• Right click and select Update Driver Software.
• Click Browse my computer for driver software.
• Click Browse, set the path to the Systems C drive.
• Click OK.
• Click Next.
Note: If a Window Security Window pops up, select Install this driver software anyways.
• Click Close.
• At System Settings Change pop up prompting the user to restart the system, Click
No.
7. Select the first AMD-RAID Controller:
• Right click and select Update Driver Software.
• Click Browse my computer for driver software.
• Click Browse, set the path to the Systems C drive.
• Click OK.
• Click Next.
Note: If a Window Security Window pops up, select Install this driver software anyways.
• Click Close.
• Click No at the System Settings Change pop up prompting the user to restart the
system.
8. Expand System Devices.
9. Select AMD-RAID Config Device:
• Right click and select Update Driver Software.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 5
RAID Software Update
73
• Click Browse my computer for driver software.
• Click Browse, set the path to the Systems C drive.
• Click OK.
• Click Next.
Note: If a Window Security Window pops up, select Install this driver software anyways.
• Click Close.
10. Restart the System.
5.5 Linux
®
Drivers
Ubuntu – Update Drivers or Resync with an Updated Ubuntu
Kernel
Note: If not already done, complete Section 5.3.3 page 70 to get the latest AMD-RAID driver_sdk.
1. Click the Terminal icon.
• Network must be enabled and configured.
• Enter sudo apt-get install -y build-essential.
Warning: If the systems kernel version is updated, perform step 2 before the system is
rebooted. Failing to do so may result in the system failing to boot.
2. Change directory to the RAIDXpert2 driver_sdk directory and enter the following:
• cd /opt/raidxpert2/driver_sdk
• sudo ./install
3. Wait for the command to complete and reboot the system.
RHEL - Update the AMD-RAID Drivers
Contact your system supplier or motherboard vendor to obtain the new AMD-RAID RHEL driver.
1. Copy the AMD-RAID dd-rcraid-RHEL8….x86_64.iso.gz to a USB flash drive.
2. Insert a USB flash drive containing the AMD-RAID dd-rcraid-RHEL….x86_64.iso.gz
driver disk iso image.
3. Log into the system as root or su root
4. Click Activities->Files and select the USB flash drive inserted previously.
5. Locate and select the AMD-RAID dd-rcraid-RHEL….x86_64.iso.gz.
6. Right-click and select Copy To-> Other Locations->Computer->root->Desktop.
7. Click the Select button in the upper-right corner.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
74
RAID Software Update
Chapter 5
8. Click Activities->Files and navigate to /root -> Desktop and select AMD-RAID dd-
rcraid-RHEL8….x86_64.iso.gz.
9. Right-click and select Extract Here.
10. Click Activities->Terminal to open a terminal / console window.
11. Enter cd /root/Desktop/dd-rcraid-RHEL…./rpms/x86_64
12. Enter rpm -i --force kmod-rcraid….x86_64.rpm and wait for the command to
complete.
13. Reboot the system.
14. Remove the USB flash drive.
Debian – Update the AMD-RAID Drivers
Note: If not already done, complete Section 5.3.5 on page 71 to get the latest AMD-RAID
driver_sdk.
1. Open a Terminal:
a. Network must be enabled and configured.
b. Enter - su – root, then press Enter.
c. Enter the password for the root account, then press Enter.
d. Enter – apt install -y build-essential.
Warning: If the systems kernel version has been updated, perform step 3 before the system
is rebooted, failing to do so may result in the system failing to boot.
2. Change directory to the RAIDXpert2 driver_sdk directory and enter the following:
• cd /opt/raidxpert2/driver_sdk
• ./install
3. Wait for command to complete.
4. Reboot the System.
5.6 Adding NVMe to Existing AMD-RAID System
Update Windows
®
10 Drivers for SoC and AMD 300/400/500-Series
Chipsets
1. Backup the user data before doing any upgrade.
2. If not already done, perform the steps in Section 5.3.2.1 on page 69.
3. If not already done, perform steps in Section 5.4.1 on page 71.
Update Platform BIOS
1. Flash the BIOS with a version that supports AMD-RAID NVMe RAID
2. Enable RAID on the SOC, Chipset and NVMe
3. Save the BIOS settings
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 5
RAID Software Update
75
4. Power off the system
5. Install the NVMe devices
6. Power on the system
Install the AMD-RAID Driver for NVMe
1. Open Device Manager.
2. Expand Storage Controllers.
a. Select the desired Standard NVM Express Controller
b. Right click and select Update Driver Software.
c. Click Browse my computer for driver software.
d. Click Let me pick from a list of available drivers on my computer.
e. Click Have Disk.
f. Click Browse, set the path to the Systems C: drive.
g. From the list, select the rcbottom.inf entry.
h. Click Open.
i. Click OK.
j. Click Next.
Note: If a Window Security Window pops up, select Install this driver software anyways.
k. Click Close.
l. Click No at the System Settings Change pop up, prompting the user to restart the
system.
m. Perform Step 2 for each additional NVMe device you want to run RAID.
n. Expand Other Devices.
o. Select the desired Unknown Device.
Note: If you are unsure which entry to use, select an Unknown Device, Right click and
select Properties. Click the Details Tab and the device instance path should display
rcbottom.
p. Right Click and select Update Driver Software….
q. Click Browse my computer for driver software.
r. Click Next.
s. Click Have Disk.
t. Click Browse, set the path to the Systems C: drive.
u. From the list, select the rcraid.inf entry.
v. Click Open.
w. Click OK.
x. Click Next.
Note: If a Window Security Window pops up, select Install this driver software anyways.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
76
RAID Software Update
Chapter 5
y. Click Close.
z. Click No at the System Settings Change pop up prompting the user to restart the
system.
3. Perform Step 4 for each addition NVMe you want to run RAID.
4. Expand Other Devices:
a. Select AMD-RAID Configuration SCSI Processor Device.
b. Right click and select Update Driver Software….
c. Click Browse my computer for driver software.
d. Click Let me pick from a list of available drivers on my computer.
e. Click Next.
f. Click Have Disk.
g. Click Browse, set the path to the Systems C: drive.
h. From the list, select the rccfg.inf entry
i. Click Open.
j. Click OK.
k. Click Next.
Note: If a Window Security Window pops up, select Install this driver software anyways.
l. Click Close.
m. Click No at the System Settings Change pop up.
5. Restart the System.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 6
AMD RAIDXpert2 Graphical User Interface (GUI)
77
Chapter 6 AMD RAIDXpert2 Graphical User
Interface (GUI)
6.1 Start RAIDXpert2
The RAIDXpert2 graphical user interface (GUI) is a Desktop Application tool designed and
packaged to be a UWP compliant package, available from the Microsoft Store. It reads and writes
to the internal RAID drivers, which communicate with the AMD-RAID arrays and physical
devices. Also available, is a version that is based off the Desktop application but is not UWP
compliant.
Open the Windows menu and search for AMD RAIDXpert2 or the desktop shortcut.
Desktop Shortcut Access
6.1.1.1 Signing in Using the RAIDXpert2 Desktop Shortcut
Open the Windows menu and search for AMD RAIDXpert2, click to open or make a desktop
shortcut, or pin to the taskbar.
6.1.1.2 Help and About Windows
To view the software version and build number for the GUI, select About at the Help menu. The
AMD RAIDXpert2 Driver Version and GUI Version displays.
For AVA Reference Help, select Help > User Guide. A pdf version of this document will display.
A pdf reader program will be necessary to view it.
For further customer support, click Help > Support this will direct you to the AMD Drivers and
Support page, or contact your system supplier or motherboard vendor.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
78
AMD RAIDXpert2 Graphical User Interface (GUI)
Chapter 6
6.2 Reviewing the RAIDXpert2 GUI
The Array View Section of the Array Status Window
6.2.1.1 Elements of the Array View Section
The Array View section presents a graphical view of array properties. Table 17 provides
information about the elements of the Array View section (see Figure 2 on page 79).
Table 17. Elements of the Array View Section, Array Status Window
Element
Description
Controller Name
The RAIDXpert2 controller for the arrays displayed below it.
Array
The number assigned to an array.
Array name
The name assigned to an array.
RAID Level
The RAID level of the array.
Disk Number
The number assigned to disks in an array.
Disk
Manufacturer
The manufacturer of disks in an array.
Disk Model
Number
The model number of the disks in an array.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 6
AMD RAIDXpert2 Graphical User Interface (GUI)
79
Figure 2. Array Status Window
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
80
AMD RAIDXpert2 Graphical User Interface (GUI)
Chapter 6
The Disk List Section of the Array Status Window
6.2.2.1 Elements of the Disk List Section
The Disk List section provides information about all disks assigned or available to arrays. Table
18 provides information about the elements of the Disk List section.
Table 18. Elements of the Disk List Section, Array Status Window
Element
Description
Disk
Controller and disk number.
State
State of the disk (Online, Offline, SMART Error).
Type
Disk type (Disk, Legacy, New).
Port Type
Negotiated Speed (not the speed of the port type and SATA NCQ or NVMe
Capacity
Disk capacity:
1 MB = 1,000,000 bytes
1 GB = 1,000,000,000 bytes
Note: Because the ATA storage industry has standardized the meanings of
MB as 1,000,000 bytes and GB as 1,000,000,000 bytes, RAIDXpert2
reports the same units
Space Available
Total amount of space unused on the disk.
Largest Available
Largest contiguous unused space on the disk.
GS
Indicates if the disk is assigned as a global spare.
Users
Number of arrays that this disk is a member of.
Model
Disk manufacturer’s model number.
Serial No.
Disk manufacturer’s serial number.
Firmware
Disk manufacturer’s firmware version.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 6
AMD RAIDXpert2 Graphical User Interface (GUI)
81
If a disk is missing from the Disk List, the most likely cause is:
• A loose cable. Make sure that all disk cables are connected, then perform a rescan.
• A disk that is not fully seated in its bay or slot. Make sure that the disk is inserted
completely in its bay or slot, then perform a rescan.
The Array List Section of the Array Status Window
6.2.3.1 Elements of the Array List Section
The Array List section provides information about the arrays. Table 19 provides information about
the elements of the Array List section.
Table 19. Elements of the Array List Section, Array Status Window
Element
Description
Device
The array number.
OS Name
Corresponds to the Disk number in Windows Disk Management.
System
If yes, it is your boot array, otherwise it is not a boot critical array.
Partition
Drive letter that was assigned to this array during the partition process. (A
blank space appears if the array has not been partitioned.)
Note: If a dynamic volume is created on an array, RAIDXpert2 cannot
retrieve the volume’s drive letter.
Array Name
User-created name for the array.
Type
The RAID level (RAID type) or LEGACY.
Total Capacity
Total capacity:
1 MB = 1,000,000 bytes
1 GB = 1,000,000,000 bytes
Note: Because the ATA storage industry has standardized the meanings of
MB as 1,000,000 bytes and GB as 1,000,000,000 bytes, RAIDXpert2
reports the same units.
State
State of the array (NORMAL, CRITICAL, OFFLINE).
Task
Task type, if in progress (TRANSFORM, CHECK, CHECK_BITMAP,
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
82
AMD RAIDXpert2 Graphical User Interface (GUI)
Chapter 6
Element
Description
CREATE, RESTORE, ZERO, SECURE_ERASE).
Task State
The state of the task (STARTED, PAUSED, COMPLETED); the progress
of the task is given in the Array View section.
Process
Percent given of a given task.
Pri
Task priority if a task is in progress.
Scan
Background Array Scan enabled? (Yes/No).
Cache
Current cache setting (NC = No Cache, R = Read Ahead Cache, W = Write
Back Cache, RW = Read/Write Cache).
Cache Tag size
Any Array with only HDD/SSD will have default CTS of 64k
Any Array with NVMe/HDD/SSD will have default CTS of 256k
Dedicated Spare
If assigned, the number of dedicated spares assigned to array.
The Event View Section of the Array Status Window
6.2.4.1 Elements of the Event View Section
The Event View section is an optional-view section. It can be displayed or hidden by selecting
View > Event View.
The information in the Event View is linked to the View Log. The View Log displays user-
initiated tasks or actions, and system-generated notifications and events. The View Log can be
accesses by selecting View > Log.
The Event View provides information about the events. Table 20, on page 82, provides
information about the elements of the Event View section.
Table 20. Elements of the Event View Section, Array Status Window
Element
Description
#
The number of the event.
Date
The date and time at which the event occurred.
Event
The RAIDXpert2 Asynchronous Event Notification (AEN) number of the event.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 6
AMD RAIDXpert2 Graphical User Interface (GUI)
83
Element
Description
Priority
The notification priority of the event: Low, Informational, Warning, Critical, or Fatal.
Text
A brief description of the event.
Array and Disk Commands
The Array and Disk menus of the Array Status window contain lists of commands. The commands
allow the system user to initiate or modify array- and disk-related tasks.
Not all commands are available for an array or for the system. Availability depends on:
• The tasks that can be performed with the system’s license level.
• The RAID level of an array. For example, a Consistency Check can be performed only on
arrays at a redundant RAID level.
• The remaining capacity of the disk drives. For example, if a system has three disk drives
and large arrays have used all of the capacity on two of the disks, only non-redundant
Volume arrays can be created on the remaining disk. Certain commands are not available
with a non-redundant array.
Table 21 provides page numbers for each command.
Table 21. Disk Menu Commands
Disk Commands
See Detailed Information on this Page
Rescan
page 83
Initialize
page 84
Clear Metadata
Page 84
Properties
page 85
Options
page 85
6.3 Working with Disks
Rescan Disks
The Rescan Command Performs the Following Actions:
• Rescans the SATA channels that search for new, legacy, or removed disks.
• Rereads the configuration information from each disk.
When a disk is offline, it might be brought online by using a rescan. A rescan also stops and then
automatically resumes all tasks.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
84
AMD RAIDXpert2 Graphical User Interface (GUI)
Chapter 6
To rescan disks, select Rescan at the Disk menu.
Initialize Disks
When a disk is initialized, RAIDXpert2 configuration information (metadata) is written to the
disks. If a disk is new and has not been used before, or if it is a legacy disk, it must be initialized
before it can be used in a RAIDXpert2 array. After a disk is initialized, it appears as Disk in the
Disk List.
If all the disks contain metadata, the Initialized button is deactivated (greyed out).
Note: All new disks and legacy disks will have an associated array. You must delete the array in
order to initialize the disk.
6.3.2.1 To Initialize Disks
1. At the Disk menu, select Initialize. The Initialize Disk window displays.
2. Select the disk(s) to be initialized, by selecting the box next to the disk(s).
3. Click Initialize Selected.
Clear Metadata Description
When a device has Clear Metadata applied to it, the RAIDXpert2 metadata is removed and the
device becomes a New/Legacy device.
If the device is part of an Array or is a New/Legacy device, it will not be available to be selected.
Also, if there aren’t any devices that are empty, the Clear Metadata button is deactivated (greyed
out). The device will no longer be useable in AMD-RAIDXpert2 until it is initialized.
6.3.3.1 To Clear Metadata Steps
1. At the Disk Menu, select Clear Metadata. The Clear Metadata window displays.
2. Select the device(s) to be initialized, by selecting the box next to the device(s).
3. Click Clear Metadata.
Change Cache Properties for Disks
The Read Ahead and Write Back Cache properties can be changed if the disks support this option.
The default settings are:
• Read Ahead: enabled.
• Write Back Cache: enabled.
CAUTION: Leaving Write Back Cache enabled can increase the likelihood of data being
corrupted if the system experiences a power interruption or unexpected shutdown.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 6
AMD RAIDXpert2 Graphical User Interface (GUI)
85
Note: A disk’s cache setting cannot be changed if a task is active for the array. The cache settings
are enabled when the task is finished.
Note: As default setting NVMe Physical disk Read ahead and Write Back cache is always
disabled. User cannot enable the setting as it may impact the operational performance of
the NVMe disk.
6.3.4.1 Change Disk Caching Properties
1. At the Disk menu, select Properties.
2. The Properties window opens.
3. Select the disks you want to change the properties of.
4. Click Enable or Disable for the desired settings.
Note: Each time Enable or Disable is clicked, the disk selection clears. To change multiple
settings on one disk, select the disk before clicking each setting.
Options
Spare disks allow an array to be rebuilt when a disk fails. Global spares can be used in any array,
while dedicated spares are assigned to a specific array.
6.3.5.1 Assign a Disk as a Dedicated or Global Spare
1. Select a disk in the Disk List section.
2. Select Options at the Disk menu. Options for Disk Device displays in the Disk List panel.
3. Perform one of the following actions:
• To use the disk as a dedicated spare, select Assign as Dedicated Spare.
Note: The capacity of a dedicated spare must be equal to or larger than the capacity of the
smallest disk in the array.
• Select Assign as Global Spare to use the disk as a global spare.
4. Click Confirm.
6.4 Working with Arrays
Create and Format Arrays
RAIDXpert2 allows the partitioning and creation of as many as eight arrays across the system’s
disks. Portions of disks can be used to create arrays, while other arrays use different portions of
the same disks.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
86
AMD RAIDXpert2 Graphical User Interface (GUI)
Chapter 6
Table 22. Array Menu Commands
Array Commands
See Detailed Information on this Page
Create
page 87
Name
page 88
Transform
page 88
Check Consistency
page 95
Background Array Scan
page 96
Modify Cache Settings
page 94
Task
page 94
Name
page 88
Hide
page 97
Identify Array
page 81
Prepare to Remove
page 97
Remove Spares
page 97
Delete
page 93
Delete Multiple Arrays
page 93
Secure Erase
page 98
6.4.1.1 Before You Begin...
Review the issues and recommendations indicated in Table 23.
Table 23. Creating Arrays: Issues and Recommendations
Issues
Recommendations
Access to arrays
The creation of arrays, even redundant arrays, allows users immediate
access to the arrays (unless the Zero Create option is used during the Create
process).
Array numbers
Array numbers are valid only for a given boot and can be different in the
BIOS Configuration Utility and RAIDXpert2. If a permanent label is
required, use the Array Naming feature described in Section 6.4.2, Name
Arrays, on page 88.
Array size
The array size of the new array is limited to 2.199 TB on some versions of
Windows and Linux. Refer to the operating system documentation for
details on maximum array sizes.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 6
AMD RAIDXpert2 Graphical User Interface (GUI)
87
Issues
Recommendations
Number of arrays
In some circumstances, more than eight arrays are possible. They might
appear to function properly but are not supported by AMD-RAID.
System reboot
When the system reboots, the creation process continues where it left off.
6.4.1.2 Create an Array
6.4.1.2.1 Select an Array and Cache
1. Select Create at the Array menu.
2. Select the disk(s) to include in the array by checking the box next to the desired disk(s) in
the Select Active Disks: field.
Note: Click All to select all disks, or click Unused to select disks that are not currently used in an
array. Maximum of 8 NVMe/HDD/SSD disks can be part of array. if more than 8 disks,
the Create button will be grayed out or unselectable.
3. Enter a name for the array in the Array Name: field.
Note: The following characters are not allowed in an array name
(
)
^
,
|
=
“
”
.
4. Select an array type at the Array Type: drop-down menu.
5. Select an option at the Organized As: drop-down menu.
Note: The Organized As: drop-down menu only displays options for advanced management of a
RAID10 configuration if you selected RAID10.
6. Enter the capacity in the Capacity: field. The maximum available capacity changes with:
• The disks that are selected.
• The RAID level of the array.
7. Select a cache option at the Cache Options: drop-down menu. (The default is Read and
Write Back Cache.)
8. Cache Tag Size will default to a setting based off of the disks that are selected. All
HDD/SSD, default will be 64k. All NVMe or a mix of NVMe/HDD/SSD will default to
256k. The user should not change from the default settings.
9. Check Background Array Scan to enable background array scanning. (A background
array scan checks the sectors of the disks in an array for potential problems. A background
array scan runs continuously, until the user stops it by accessing Array > Background
Array Scan > Stop).
Note: Please refer to Table 16 on page 43 for Default Cache Tag Size.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
88
AMD RAIDXpert2 Graphical User Interface (GUI)
Chapter 6
Note: See Section 6.4.11, Scan an Array in the Background, on page 96, for details.
10. Check Skip Initialize to skip initialization.
CAUTION: Creating a redundant array with Skip Initialization selected can result in data
corruption.
11. Check Leave Existing Data Intact if an array is lost or deleted, and the user immediately
creates a replacement array of the same characteristics. This leaves the data on the disks of
the lost or deleted array untouched when the replacement array is created. See Table 40, on
page 123, for additional information.
12. Check Zero Create to write zeros on the created array. If Zero Create is used, the array is
not immediately available (the array is hidden from the operating system during the Create
process).
13. Click Create to create the array.
6.4.1.3 Partition and Format an Array
Each operating system has different names and paths for partitioning and formatting arrays and as
such are outside the scope of this document. For more information, see your operating system’s
user documentation.
Name Arrays
Naming an array can be useful when creating backups. It makes an array easy to identify in a list
of arrays.
1. In the Array View section, select the array to name.
2. At the Array menu, select Name. The Array Name window displays.
3. Type the desired name in the blank field.
Note: The following characters are not allowed in an array name:
(
)
^
,
|
=
“
”
.
4. Click OK. The array name appears in the Array List and in the BIOS Configuration Utility
(only 17 characters of the name are displayed in the BIOS Configuration Utility).
Transform Arrays
With the Transform task, an array can be:
• Transformed from one RAID level to almost any other RAID level. This function is also
referred to as Online RAID Level Migration (ORLM).
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 6
AMD RAIDXpert2 Graphical User Interface (GUI)
89
• Expanded dynamically, even under I/O load, by adding disks to the array to increase the
capacity of the array. This function is also referred to as Online Capacity Expansion
(OCE).
6.4.3.1 Before You Begin
Review the issues and recommendations indicated in Table 24.
Table 24. Transforming Arrays: Issues and Recommendations
Issues
Recommendations
Array size
An array cannot be transformed to a smaller-sized array. The transformed
array must be the same size as or larger than the original array.
Array size limits
The array size of the transformed array is limited to 2.199 TB on some
versions of the Windows and Linux operating systems. Refer to the
operating system documentation for details on maximum array sizes.
Disk failure during a
Transform
If a disk fails while the Transform task is in progress, no data is lost if the
source and destination RAID levels are redundant. If a spare has been
assigned to the destination array, a fail-over task starts as soon as the
Transform completes (if the spare is available after the Transform).
Multiple arrays
If there are multiple arrays, it might not be possible to transform some of the
arrays to a larger size. If, in the future, an array needs to be expanded in
size, it is best to configure the available space as a single array.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
90
AMD RAIDXpert2 Graphical User Interface (GUI)
Chapter 6
Table 24. Transforming Arrays: Issues and Recommendations (Continued)
Issues
Recommendations
Task control
commands
When using task control commands, a Transform task can only be paused or
resumed but not removed. To end a Transform task, pause and delete it.
Note: If a task is paused and then deleted, the array is deleted. Deleting a
task is the same as deleting an array. Data loss occurs when a task is
deleted. Please ensure that data is backed up prior to deleting a task
involving a Transform or a Restore.
System reboot
during a Transform
If the system reboots during a Transform, the Transform continues where it
left off.
6.4.3.2 Transform an Array
1. In the Array View section, select the array to transform.
2. At the Array menu, select Transform.
Note: If the system window is not wide enough, only the Destination View is displayed.
3. Select all the desired disks for the array (including disks that might be already in the array)
by selecting the box next to the drive in the Disk List section.
Note: Click Same to select all disks currently used in the array, All to select all disks, or
Unused to select disks that are not currently used in an array.
4. Select the RAID level to be transformed at the Array Type: drop-down menu.
5. Select an option at the Organized As: drop-down menu.
Note: The Organized As: drop-down menu only displays options for advanced management
of a RAID10 configuration if you selected RAID10.
6. Expand the array by entering the size of the new array in the Capacity: field. The
maximum available capacity changes with:
• The disks that are selected.
• The RAID level of the array.
Note: If a Transform is not possible, the Commit option is not enabled. A typical reason
preventing a Transform is insufficient available space on the disks.
7. Click Commit.
Note: Unless the transformation is instantaneous, the Array Status window updates to show
the source and destination arrays, along with the progress of the transformation.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 6
AMD RAIDXpert2 Graphical User Interface (GUI)
91
6.4.3.3 Access Additional Space
After an array has been transformed to a larger size, use the operating system tools to access the
additional space.
There are several possible methods for expanding the existing file system on an array that has been
transformed to a larger size:
• Microsoft provides a command prompt utility called Diskpart.exe that can expand any
NTFS file system without requiring a reboot. The Diskpart.exe utility version to use
depends on the version of Windows being run. The Diskpart.exe utility can be found on
the CD that comes with some versions of Windows, or at the Microsoft website
(http://www.microsoft.com) for others. Use the correct version for the operating system.
• For arrays formatted with FAT32, use a third-party application, such as PartitionMagic
from PowerQuest Corporation.
Restore (Rebuild) Arrays
With the Restore task, a redundant-type array whose state has changed to Critical can be restored
(rebuilt) in one of two ways:
• By assigning a dedicated spare to the array.
• By creating a global spare or by using an existing global spare. (An existing global spare
automatically starts restoring a redundant-type array after the array’s state changes to
Critical.)
An array in an Offline state cannot be restored. This means that non-redundant arrays (Volume,
RAID0) cannot be restored: when a single disk in a non-redundant array fails, the array state
changes to Offline.
Note: If a Critical redundant array that is being restored loses a second disk (RAID1), or loses a
second disk in the same mirror set (RAID10), the Restore task fails. The array must be re-
created from backup storage data.
6.4.4.1 Before You Begin
• Make sure that the disk chosen as the dedicated spare or global spare has sufficient
available capacity to restore the array. The capacity of the spare disk must be equal to or
larger than the capacity of the smallest disk in the critical array.
• Know how to create a global or dedicated spare. See Section 6.4.12, Add or Remove
Dedicated Spares, on page 97 or Section 6.4.13, Add or Remove Global Spares, on page
97.
6.4.4.2 Restore a Critical Array
1. In the Array View section, select the critical array.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
92
AMD RAIDXpert2 Graphical User Interface (GUI)
Chapter 6
2. At the Disk List section, double click on a disk.
3. At the Disk menu, select Options. Options for Disk Device displays in the Disk List
panel.
4. Perform one of the following actions:
• To use the disk as a dedicated spare, select Assign as Dedicated Spare.
• To use the disk as a global spare, select Assign as Global Spare.
5. Click Confirm.
Prepare to Physically Remove an Array
6.4.5.1 Physically Remove an Array
CAUTION: Prior to removing an array, remove its drive letter (Windows) or unmount the array
(Linux).
1. Select the array to remove in the Array View section.
2. Select Prepare to Remove at the Array menu.
3. Click Yes at the Prepare to Remove window. The array and all associated disks disappear
from the Array Status window.
4. Remove the first disk from the system.
5. Click Cancel when the Drive Removed window displays.
6. Remove the remaining disks in the array.
7. When all disks in the array are removed from the system, select Rescan at the Disk menu.
6.4.5.2 Array Migration
The disks in an array, after being removed from one system with a RAIDXpert2 controller, can be
migrated to another system with a RAIDXpert2 controller. The disks and array(s) appear in the
second system, in Disk Management, the BIOS Configuration Utility, and RAIDXpert2, as normal
RAIDXpert2 disks and array(s).
If the disks from a RAIDXpert2 system are migrated to a non-RAIDXpert2 Windows-based
system, the disks appear in Disk Management of the second system as healthy, unknown
partitions. To use the disks, use Disk Management to delete the RAIDXpert2-created partitions
and to create Windows partitions on the disks.
CAUTION: All data contained in a RAIDXpert2 array are lost if the RAIDXpert2 disks of the
array are migrated to a non-RAIDXpert2 system.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 6
AMD RAIDXpert2 Graphical User Interface (GUI)
93
Delete Arrays
CAUTION: Deleting an array permanently destroys all data that is on the array. This action
cannot be undone, and it is very unlikely the data can be recovered.
6.4.6.1 Before You Begin
Review the issues and recommendations indicated in Table 25.
Table 25. Deleting Arrays: Issues and Recommendations
Issue
Recommendation
Drive letters or
partitions
Remove drive letters or partitions from the array using procedures in your
operating system. Each operating system has different names and paths for
removing drive letters or partitions and as such are outside the scope of this
document. For more information, see your operating system’s user
documentation.
Operating system
impact on arrays
If the array is not being used by the operating system, the array can be
deleted at any time, even while tasks are running on the array.
If the array is being used by the operating system, the array cannot be
deleted. Therefore, a RAIDXpert2 bootable array cannot be deleted in
RAIDXpert2. A RAIDXpert2 bootable array can only be deleted in the
BIOS Configuration Utility.
6.4.6.2 Delete an Array
1. In the Array Status window, select the array to delete.
2. At the Array menu, select Delete. A window opens, warning about deleting the array.
3. Click Yes. The array disappears from the Array View section.
Note: Also see Section 7.5, Delete Arrays: rcadm --delete, on page 107.
6.4.6.3 Delete Multiple Arrays
1. Select Delete Multiple Arrays at the Array menu.
2. Select (check mark) the arrays you want to delete. The Select All button can also be used.
3. Click the Delete Button. A window opens, warning about deleting the array(s).
4. Click Yes. The array(s) will disappear from the Array View Section.
6.4.6.4 Recreate a Deleted Array
If an array is deleted, it might be possible to recreate the array. See Table 40. Recreate a Deleted
Array, on page 123.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
94
AMD RAIDXpert2 Graphical User Interface (GUI)
Chapter 6
Cache Settings for Arrays
Table 26 provides information about the four array-caching options available.
Table 26. Cache Array Options
Option
Description
No Cache
I/O requests are translated and passed to the disks without keeping a cached
copy of the data available for future requests
Read Cache
Data reads are cached, if appropriate. This option performs sequential Read
Ahead, when necessary
Write Back Cache
Data writes are cached. This setting is intended for advanced users who
understand the implications of Write Back caching
Read + Write Back
Cache (default
setting)
Both Read and Write Back Cache options can be selected
Note: Cache options cannot be changed while a task is active on the array. They can be changed
at any other time, including while I/O is running.
6.4.7.1 Change Cache Settings
1. Select the array on which to change caching options in the Array View section.
2. Select Modify Cache Settings at the Array menu.
3. Choose No Cache, Read Cache, Write Back Cache, or Read + Write Back Cache. The
new cache setting displays in the Array List Cache information.
Change the Priority Level of a Task
The task priority command allows the user to speed up or slow down tasks being performed on
arrays.
To decrease the amount of time it takes for a task to complete, set the task priority higher (10 is
the highest).
Note: A task priority can only be changed after a task is running on the array.
6.4.8.1 Change a Task Priority
1. Select the array on which tasks are being performed in the Array View section.
2. Select Task and select Priority at the Array menu.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 6
AMD RAIDXpert2 Graphical User Interface (GUI)
95
3. At the Task Priority window, change the task priority by moving the slide one way or the
other.
4. Click OK.
Interrupt, Cancel, or Resume a Task
The task control commands allow the user to pause, resume, or cancel (remove) tasks being
performed on arrays.
Full task control can be used on Create, Consistency Check, and Check Bitmap tasks. On Restores
with dedicated or global spares the task can be removed, but the array returns to the Critical state.
Note: Task control can be used only when a task is running on an array.
6.4.9.1 Interrupt, Cancel, or Resume a Task
1. In the Array View section, select the array on which a task is being performed.
2. At the Array menu, click Task and select one of the following:
• Pause to interrupt the task.
• Remove to cancel the task.
• Resume to interrupt the task.
Check for Consistency
For redundant-type arrays only, the Consistency Check task is available at the Array menu. When
this task is selected it starts the process of verifying that the mirror drive consistency for fault-
tolerant disks is correct. If inconsistent areas are found, they are corrected during this process.
Having consistent arrays is very important. If an array is inconsistent and a drive fails, data is lost.
RAIDXpert2 is designed to maintain consistent arrays, but it is good practice to run frequent
consistency checks.
When a redundant array is created using the Create command, and the Skip Initialize option is not
checked (the default setting), a Consistency Check is performed automatically. Although a
Consistency Check that runs during a Create task can be removed (by highlighting the array and
selecting Task > Remove), the array that is created is not redundant. Unless a Consistency Check
runs from end-to-end, an array is not protected.
After a Consistency Check has been started, adjust the priority of the Consistency Check task
relative to user I/O activity. Use the Task Priority option (see Section 6.4.8, Change the Priority
Level of a Task, on page 94).
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
96
AMD RAIDXpert2 Graphical User Interface (GUI)
Chapter 6
6.4.10.1 Before you Begin
• The Consistency Check command can be started at any time on a redundant-type array, as
long as another task is not running on the array.
• The Consistency Check command can be started while under I/O load.
• If the array state is Critical, the Consistency Check fails.
• To estimate the remaining time for a Consistency Check, look at the percentage of the task
that is completed (in hours: minutes: seconds). These details are displayed next to the
array in the Array View section of the Array Status window.
6.4.10.2 Manually start a Consistency Check
1. Select the array on which to run the Consistency Check in the Array View section.
2. Select Check Consistency at the Array menu.
3. Click Start.
6.4.10.3 Manually stop a Consistency Check
1. Select the array on which to stop the Consistency Check in the Array View section.
2. Select Check Consistency at the Array menu.
3. Click Stop.
Scan an Array in the Background
A Background Array Scan task performs a continuous background read operation of an array,
accessing at least one copy of every block of the array from beginning to end.
A Background Array Scan is manually started by the user and runs continuously until the user
stops it.
Although a Background Array Scan can run while an array is engaged in other tasks, it is
recommended that the Background Array Scan run while the array is idle (that is, when there is no
I/O to or from the array).
6.4.11.1 Enable or Disable a Background Array Scan
1. Select the array to on which to run the Background Array Scan in the Array View
section.
2. Select Background Array Scan at the Array menu.
3. Enable or disable the Background Array Scan.
• Select Start to enable a Background Array Scan.
• Select Stop to disable a Background Array Scan.
Note: A Background Array Scan can also be enabled for an array when it is created.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 6
AMD RAIDXpert2 Graphical User Interface (GUI)
97
Add or Remove Dedicated Spares
If a dedicated spare is added, make sure there is adequate space on the dedicated spare.
6.4.12.1 Add a Dedicated Spare
1. Select the array on which to assign a dedicated spare in the Array View section.
2. Double-click on the disk chosen as the dedicated spare in the Disk List section.
3. Select Options at the Disk menu.
4. Select Assign as Dedicated Spare, then click Confirm.
6.4.12.2 Remove a Dedicated Spare Assignment
1. Select the array from which to remove a dedicated spare in the Array View section.
2. Select Options at the Disk menu.
3. Select Remove as Dedicated Spare, then click Confirm.
TIP: For additional information see Section 2.10, Sparing Options: Disks and Arrays, on page 32.
Add or Remove Global Spares
If a global spare is being added, make sure there is adequate space on the global spare.
6.4.13.1 Add a Global Spare
1. Select the disk chosen as the global spare in the Disk List section.
2. Select Options at the Disk menu.
3. Select Assign as Global Spare, then click Confirm.
6.4.13.2 Remove a Global Spare
1. Select the disk to be removed as the global spare in the Disk List section.
2. Select Options at the Disk menu.
3. Select Remove as Global Spare, then click Confirm.
Hide an Array
Hide allows the user to hide the array from the operating system.
6.4.14.1 Hide an Array
1. Select the array to hide in the Array View section.
2. Select Hide at the Array menu. The array will disappear from the Array View.
Note: If the array is currently hidden, select Array > Un-hide to display it.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
98
AMD RAIDXpert2 Graphical User Interface (GUI)
Chapter 6
Secure Erase
Secure Erase is used for erasing all data on an array and ensuring that it will be unrecoverable,
even with advanced data recovery techniques.
Data is Securely Erased By:
• Hiding the array from the OS
• Writing over each region of the disk with 3 patterns (0xAA, 0x55, and random)
• Using a 4th pass with all zeros to ensure that a RAID1 will be consistent
After the secure erase is complete, a user can choose to manually delete the array or reuse it. If the
user chooses to reuse it, it must be unhidden using the procedure in Section 6.4.14, Hide an Array,
on page 97.
CAUTION: When an array is securely erased, the data on the array is lost.
6.4.15.1 Securely Erasing an Array
1. Select the array to erase in the Array View section.
2. Select Secure Erase at the Array menu, then click OK.
6.5 Working with Views
The View menu allows the user to:
• Refresh the display
• Display the event view
• Display the Application log
• View Controllers
• Theme – Dark, light
• Icon Size – Small, Large
• Font Size – Small, Normal, Large
Display or Hide Controller Event Log Panel
To display or hide the Controller Event Log, select Event View at the View menu. When the
Controller Event Log panel displays, a checkmark appears next to the Event View option at the
View menu.
Log Window
The [system name]: View Log window displays all the messages generated by RAIDXpert2. All
messages are logged, not just the ones enabled at Options > Notification.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 6
AMD RAIDXpert2 Graphical User Interface (GUI)
99
All messages received from the RAIDXpert2 driver are sent to a message log file. If desired,
change the name of this file in the Notification window.
By default, notification events in Windows-based systems are saved to:
%Program Files%\RAIDXpert2\rc_service.log.
Notification events in Linux-based systems are saved to /var/log/rc_service.log.
Select Log to view the RAIDXpert2 messages at the View menu.
Refresh the Display
Select Refresh at the View menu to refresh the display.
View Controllers
1. Select View Controllers in the View menu. A window displays listing the Controller List
of system.
Note: The list will include the Controller Number, Type, Serial Number, Port Count, PCI
Vendor ID, PCI Device ID, PCI SubVendor ID, PCI SubDevice ID.
2. Click OK to close the window.
6.6 Working with Options
Event Notifications
The Event View section of the Array Status window displays the priority listing. The event log
priority levels, in ascending order, are indicated in Table 27.
Table 27. Event Log Priority Levels
Event Priority
Description
Low
Displays messages for normal system operations. (This event is not
displayed unless requested by the user.)
Informational
Displays information that might be useful to know.
Warning
The system user should be informed about this event, but probably does not
need to take action.
Critical
The system user must be informed about this event and should take action.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
100
AMD RAIDXpert2 Graphical User Interface (GUI)
Chapter 6
Fatal
The RAIDXpert2 driver is fatally damaged and the RAID subsystem has
shut down.
6.7 Add Spares Using a RAIDABLE Array
Note: RAIDABLE array is formerly known as RAID Ready array.
1. Install a new disk. After a rescan, a pop-up window opens.
Note: To create a redundant RAID1 array, the new disk must be the same size or greater than
the RAIDABLE disk.
2. Select the new disk in the Select a Disk section.
3. Select the desired option in the Choose a Task section.
Note: Selecting any option first initializes the disk before the selected task is started.
a. Backup Array: This option creates a backup of the RAIDABLE array on the new
disk.
b. Transform Array: This option allows the user to either add space to the RAIDABLE
array or create a redundant array.
c. Initialize Disk for AMD-RAID: This option allows the disk to be used when creating
arrays.
d. Make disk a Global Spare: This option assigns the new disk as a global spare.
4. In the Select a Source/Destination section:
a. Select the Source RAIDABLE Array from the drop-down menu.
b. Select the Destination Array Type from the drop-down menu.
Note: The Destination Array Type option is only available when either the Backup Array
task or Transform Array task is selected. Only valid array types for the number of
disks inserted will be displayed. For example, if one new disk is inserted, only RAID0
or RAID1 will display in the drop-down menu.
5. Click Confirm.
If either the Backup Array task or Transform Array task is selected, a Task Progress dialog
box opens. To hide the dialog box while the task is executing, click Close.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 7
rcadm Command Line Interface Tool
101
Chapter 7 rcadm Command Line Interface
Tool
7.1 What is rcadm?
The rcadm program is a command line interface (CLI) tool for managing RAIDXpert2 in the
Windows, Linux, or EFI operating system. See Section 7.8, on page 108, for rcadm.efi
Information.
The rcadm program initiates RAIDXpert2 operations, such as:
• Manage RAIDXpert2, arrays and disks (see Section 7.2, Manage Arrays and Disks: rcadm
--manage, on page 102).
• Create new arrays (see Section 7.4, Create New Arrays: rcadm --create, on page 106).
• Delete arrays (see Section 7.5, Delete Arrays: rcadm --delete, on page 107).
• Transform arrays (see Section 7.6, Transform Arrays: rcadm --transform , on page 108).
• Follow or monitor arrays and disks (see Section 7.7, Follow or Monitor Arrays and Disks:
rcadm --follow, on page 108).
• Information on drive and array states.
The rcadm program has five primary modes, with most primary modes having additional optional
arguments. The five modes of operation are indicated in Table 39.
Table 28. Modes for the rcadm Program
Mode
Usage
Manage
Uses the rcadm --manage command to manage and query RAIDXpert2,
arrays, and disks.
Create
Uses the rcadm --create command to create a new array.
Delete
Uses the rcadm --delete command to delete arrays.
Transform
Uses the rcadm --transform command to transform an array.
Follow
Uses the rcadm --follow command to follow or monitor arrays and disks.
Follow these instructions to issue the command on the operating system. Also, see Section 7.3,
View Help from the Command Line, on page 106.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
102
rcadm Command Line Interface Tool
Chapter 7
To Use rcadm with a Linux
®
Operating System
By default, rcadm is installed in /usr/bin.
To Use rcadm with a Windows
®
Operating System
• Change directories to C:\Program Files (x86)\RAIDXpert2.
• Run the rcadm.exe command from there.
or
• Add C:\Program Files (x86)\RAIDXpert2 to the system or user path
environment variables.
7.2 Manage Arrays and Disks: rcadm --manage
The rcadm --manage or rcadm -M command allows the user to view information about
RAIDXpert2 and manage the arrays and disks.
For example, the user can:
• Set cache attributes for arrays.
• Set priority levels for tasks on an array.
• Hide and unhide arrays.
• List arrays.
• Initialize disks.
• Query information about disks.
• Add and remove spares from an array.
• Set cache attributes for disks.
Understand Query Output
When the rcadm --manage --query-all or rcadm -M -qa command is used,
information about the disks and arrays for the system is displayed.
To see information about a specific controller, disk, or array use the rcadm --manage --
query command, in conjunction with the appropriate options.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 7
rcadm Command Line Interface Tool
103
rcadm Controller List Elements
Table 29. rcadm Controller List Elements
Element
Description
Number
Controller number assigned by RAIDXpert2
Type
Model number of the controller
Serial Number
Serial number of the controller
Port Count
The number of ports supported by RAIDXpert2
PCIe
®
Vendor ID
The PCIe vendor identification number
PCIe Device ID
The PCIe device identification number
PCIe SubVendor ID
The PCIe sub-vendor identification number
PCIe SubDevice ID
The PCIe sub-device identification number
SAS Address (WWID)
The SAS Address (world-wide identification number)
BIOS Version
The version of the AMD-RAID Configuration BIOS
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
104
rcadm Command Line Interface Tool
Chapter 7
rcadm Disk List Elements
Table 30. rcadm Disk List Elements
Element
Description
Disk
Disk number assigned by RAIDXpert2, corresponding to the SATA
channel ID.
State
State of the disk (Online, Failed, Unknown)
Disk Type
Disk type (Disk, Legacy, New, ATAPI)
Port Type
Port type (SATA, SATA II, SATA III, SSD, NVMe)
Port Speed
The negotiated speed of the port
Note: For NVMe the port type is always N/A.
Size
Total size of the disk:
• 1 MB = 1,000,000 bytes
• 1 GB = 1,000,000,000 bytes
Note: Because the ATA storage industry has standardized the meanings of
MB as 1,000,000 bytes and GB as 1,000,000,000 bytes, RAIDXpert2
reports the same units.
Free Space
Total amount of space unused on the disk
Largest Free Space
Largest contiguous unused space on the disk
GS
Indicates if the disk is assigned as a global spare
Ca
Current disk cache setting (NC = No Cache, R = Read Cache, W = Write
Back Cache, RW = Read + Write Back Cache).
Note: For NVMe the CA is always NC.
Ctrl Chan
Disk controller and channel number.
Vendor
Disk vendor
Model Number
Disk model number
Firmware Version
Disk firmware version
Serial Number
Disk serial number
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 7
rcadm Command Line Interface Tool
105
rcadm Array List Elements
Table 31. rcadm Array List Elements
Element
Description
A
Array number assigned by RAIDXpert2.
Type
RAID type.
O.S. Name
Name assigned by the operating system to the array. The name shows as
“Hidden” if the array is hidden from the operating system. The name
shows “??” if the array is Offline.
Sys or System Device
Indicates whether or not the array is being used as a system disk under
Windows.
State
State of the array (Normal, Critical, Offline).
Size or Capacity
Total size of the disk:
• 1 MB = 1,000,000 bytes
• 1 GB = 1,000,000,000 bytes
Note: Because the ATA storage industry has standardized the meanings of
MB as 1,000,000 bytes and GB as 1,000,000,000 bytes, RAIDXpert2
reports the same units.
Hide
Whether the array is hidden from the operating system.
Id
Globally unique identifier for the array assigned by RAIDXpert2.
Task
Task type (Transform, Check, Check_Bitmap, Not_Active, Create,
Restore)
Note: See Section 2.7, Array Tasks: Starting and Stopping Tasks, on page
28 for detailed definitions.
Task State
The state of the task (Started, Paused, Completed)
%
The progress of a current array task, such as a Create or Transform, shown
as percent complete
CA
Current array cache setting (NC=No Cache, R=Read Cache, W=Write Back
Cache, RW=Read + Write Back Cache).
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
106
rcadm Command Line Interface Tool
Chapter 7
Table 31. rcadm Array List Elements (Continued)
Element
Description
CTS
Cache tag size specifies the amount of data per disk in a stripe. Supported
sizes are 64kB, 128kB or 256kB
Any Array with only HDD/SSD will have default CTS of 64k
Any Array with NVMe/HDD/SSD will have default CTS of 256k
Scan
Background scan enabled (Yes/No)
Name
User-supplied name for the array
Dedicated Spare
Indicates the number of dedicated spares assigned to the array
(--verbose mode only)
Disk
Listing of disks that are part of the array
Used
Capacity used of a specific disk
Offset
Location on the disk where the array begins
7.3 View Help from the Command Line
To view a List of the Major Modes of Operation
Type: rcadm --help or rcadm -?
7.3.1.1 To View Help for a Specific Mode and its Options
Type: rcadm <mode> --help or rcadm < mode> -?
For example, typing rcadm --manage --help or rcadm -M -? displays help and
examples regarding that specific mode and its options.
7.3.1.2 To view the rcadm Man Page on a Linux
®
System
Type: man rcadm
7.4 Create New Arrays: rcadm --create
The rcadm --create or rcadm -C command allows new arrays to be created. As many as
eight arrays can be partitioned and created across all disks.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 7
rcadm Command Line Interface Tool
107
Portions of disks can be used to create arrays, while other arrays are using different portions of the
same disks. A maximum of eight arrays can be created.
Before You Begin...
Creation of arrays, even redundant arrays, allows users immediate access to the arrays. If the
system reboots, the creation process continues where it left off.
CAUTION: In some circumstances, more than eight arrays are possible. They might appear to
function properly but are not supported.
Note: The array size of the new array is limited to 2.199 TB with some operating systems. Refer to
the operating system documentation for details on maximum array sizes.
Note: The ability to create RAID10 or RAIDABLE arrays may not be available on your system.
Example
To create a 1 GB RAID1 array using disk members 1, 2, and 3, type: rcadm -C -r1 -d 1 2
-s 1000
To see more examples, type: rcadm -C -?
7.5 Delete Arrays: rcadm --delete
The rcadm --delete or rcadm -D command allows the user to delete one or more arrays.
CAUTION: Deleting an array permanently destroys all data that is on the array. This action
cannot be undone and it is very unlikely the data can be recovered.
Before You Begin...
• If the operating system is using an array it cannot be deleted.
• If an array is accidentally deleted, and the user wants to try and recover the data, create an
array using the same disks, same size, and same cache, and use the --leave-existing-data
option. This option writes new configuration information to the array while trying to use
the exact same disk space as before.
Example
To delete array 1, type: rcadm -D -a 1
To see more examples, type rcadm -D -?
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
108
rcadm Command Line Interface Tool
Chapter 7
7.6 Transform Arrays: rcadm --transform
The rcadm --transform or rcadm -T command allows the user to transform (migrate) an
array from one RAID level to almost any other RAID level, and to expand the array dynamically,
even under I/O load.
Before You Begin...
• An array cannot be transformed to a smaller-sized array. New arrays must be either the
same capacity or larger.
• When using the task control option, a Transform can only be paused or resumed but not
removed.
• If a spare has been assigned to the destination array, a fail-over task starts as soon as the
Transform completes, provided the spare is available after the Transform.
• If there are multiple arrays on a single controller, it might not be possible to transform
some of the arrays to a larger size. If the size of an array might be expanded in the future,
it is best to configure the available space as a single array.
• The array size of the transformed array is limited to 2.199 TB on some operating systems.
7.7 Follow or Monitor Arrays and Disks: rcadm --follow
The rcadm --follow or rcadm -F command allows the user to follow or monitor arrays
and disks. It polls the RAID subsystem for any status changes and logs them in the Windows
System Event Log.
Before You Begin...
It is recommended that the user not run more than one instance of rcadm --follow at the same time.
If the user runs more than one instance of the command, each instance captures some of the
events, but no single instance captures all events.
7.8 rcadm.efi Information
rcadm -?
-?, --help
Displays all primary rcadm commands, or if used after an option, displays help for that
specific option.
-log, --log-file
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 7
rcadm Command Line Interface Tool
109
Print output to a log file as well as standard output. Requires a log file name argument.
Overwrites existing file. Only one occurrence of this option on the command line is allowed.
Example: rcadm -M -qa -v -log status.txt
-C, --create
Command for creating arrays. Array types include linear (JBOD), volume (JBOD), RAID0,
RAID1, RAID10, RAID10n, and RAIDABLE. Some of the major functions include assigning
spare disks; setting array size; and setting cache attributes.
-D, --delete
Command for deleting arrays. This mode does not have any optional arguments.
-M, --manage
Commands for managing and querying controllers, arrays, and disks. Some of the major
functions include querying for information, adding and removing dedicated and global spare
disks, setting cache attributes for arrays and disks, performing consistency checks on
redundant array types, initializing disks, prioritizing tasks for arrays, scanning arrays and disks
for changes in status, and hiding or unhiding arrays.
rcadm -M
MANAGE
-a, --array
Used with certain options to specify arrays.
-as, --add-spare
Adds a dedicated spare disk to an array. No space is reserved on the disk selected.
-rs, --remove-spare
Removes a dedicated spare disk from an array.
-ras, --remove-all-spares
Removes any spares from an array.
-ags, --add-global-spare
Adds a disk as a global spare. No space is reserved on the disk selected.
-rgs, --remove-global-spare
Removes a global spare disk.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
110
rcadm Command Line Interface Tool
Chapter 7
-ca, --cache-array
Sets the cache attributes for an array. Cache attributes include read cache (r), read and write-
back cache (rw), write-back cache (w), and no cache (nc).
-cd, --cache-disk
Sets the cache attributes for a disk. Cache attributes include read cache (r), read and writeback
cache (rw), write-back cache (w), and no cache (nc).
-d, --disk
A required qualifier used with certain options to specify disks.
-h, --hide
Hides an array from the operating system.
-uh, --unhide
Unhides an array, making it visible to the operating system.
-id, --initialize-disk
Initializes a disk. If the disk is new and has not been used, you must initialize it before you can
create arrays.
-cm, --clear metadata
Clears metadata from a disk. Disk is no longer usable in RAID arrays until it is initialized.
-n, --name
Identifies an array with a user-supplied name. The name can be up to 30 characters, but only
17 of those characters display in the BIOS.
-p, --priority
Sets an array's task priority from 1-10, with 10 being the highest priority.
-q, --query
Lists information about specific controllers, arrays, and disks.
-qa, --query-all
Lists information about controllers, arrays, and disks.
-v, --verbose
Modifier of the --query and --query-all option. Specifies more detail for arrays and disks.
-rsc, --rescan
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 7
rcadm Command Line Interface Tool
111
Rescans the serial ATA (SATA) channels for new or removed disks.
-sa, --scan-array <on|off>
Specifies if background array scan scanning is on or off.
-sp, --smart-poll
Turns SMART polling on or off for the specified drive(s).
-t, --task
Used to pause, resume, and remove tasks.
-ul, --unlink
Unlinks two arrays linked through a create copy operation.
SYNTAX and EXAMPLES
ADD SPARE
--add-spare --array <list> --disk <list>
-as -a <list> -d <list>
Examples: rcadm --manage --add-spare --array * --disk 1
rcadm -M -as -a 1 2 -d 5 6
REMOVE SPARE
--remove-spare --array <list> --disk <list>
-rs -a <list> -d <list>
Examples: rcadm --manage --remove-spare --array 5 --disk *
rcadm -M -rs -a * -d 5
REMOVE ALL SPARES
--remove-all-spares --array <list>
-ras -a <list>
Examples: rcadm --manage --remove-all-spares --array 5
rcadm -M -ras -a *
ADD GLOBAL SPARE
--add-global-spare --disk <list>
-ags -d <list>
Examples: rcadm --manage --add-global-spare --disk 1 2 3
rcadm -M -ags -d *
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
112
rcadm Command Line Interface Tool
Chapter 7
REMOVE GLOBAL SPARE
--remove-global-spare --disk <list>
-rgs -d <list>
Examples: rcadm --manage --remove-global-spare --disk *
rcadm -M -rgs -d 5
CACHE SETTINGS FOR ARRAYS
--cache-array <cache_attribute> --array <list>
-ca <cache_attribute> -a <list>
Cache attributes: <r> for read cache
<rw> for read and write-back cache
<w> for write-back cache
<nc> for no cache
Examples: rcadm --manage --cache-array rw --array *
rcadm -M -ca nc -a 1
DISK SETTINGS (Advanced)
Disk cache:
--cache-disk <cache_attribute> --disk <list>
-cd <cache_attribute> -d <list>
Cache attributes: <r> for read cache
<rw> for read and write-back cache
<w> for write-back cache
<nc> for no cache
Examples: rcadm --manage --cache-disk r --disk 1 2 3
rcadm -M -cd w -d *
HIDE ARRAY
--hide --array <list>
-h -a <list>
Examples: rcadm --manage --hide --array 5 6
rcadm -M -h -a 4
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 7
rcadm Command Line Interface Tool
113
UNHIDE ARRAY
--unhide --array <list>
-uh -a <list>
Examples: rcadm --manage --unhide --array *
rcadm -M -uh -a 5
INITIALIZE DISK
--initialize-disk --disk <list>
-id -d <list>
Examples: rcadm --manage --initialize-disk --disk *
rcadm -M -id -d 1 2 3
NAME ARRAY
--name "name" --array <list>
-n "name" -a <list>
Examples: rcadm --manage --name "System Disk" --array 5
rcadm -M -n "Backup Disk" -a 4
QUERY
--query [--array <list>] [--disk <list>]
[--verbose]
-q [-a <list>] [-ct <list>] [-d <list>] [-v]
Examples: rcadm --manage --query --array 1 --disk --verbose
rcadm -M -q -a 1 2 3 -d -v
QUERY ALL
--query-all
-qa
Example: rcadm --manage --query-all
RESCAN DISKS
--rescan
-rsc
Example: rcadm --manage --rescan
SCAN ARRAY
--scan-array <on|off> --array <array_number>
-sa <on|off> -a <array_number>
Example: rcadm -M --array 1 --scan-array on
rcadm -M -a 1 -sa off
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
114
rcadm Command Line Interface Tool
Chapter 7
SMART POLL
--smart-poll <on|off> --disk <list>
-sp <on|off> -d <list>
Example: rcadm --manage --smart-poll on --disk
rcadm -M -sp off -d 1 2 3
TASK CONTROL
--task <task_operation> --array <array_number>
-t <task_operation> -a <array_number>
Task Operation
<pause> to temporarily pause a task
<resume> to continue running a task
<remove> to permanently remove a task
Examples: rcadm --manage --task pause --array 5
rcadm -M -t remove -a 4
TASK PRIORITY
--priority <1..10> --array <list>
-p <1..10> -a <list>
Examples: rcadm --manage --priority 5 --array 6
rcadm -M -p 1 -a
UNLINK ARRAY
--unlink --array <array_number>
-ul -a <array_number>
Examples: rcadm --manage --unlink --array 2
rcadm -M -ul -a 5
rcadm -C
CREATE
Long form:
rcadm --create <raid_type> --disk <list> [--size <size_mb>]
[--sub-member <num>] [--spare-disk <list>]
[--no-sync] [--d-spare] [--cache <r,rw,w,nc>]
[--max-size] [--name "name"] [--priority <1..10>]
[--zero][--scan-array]
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 7
rcadm Command Line Interface Tool
115
Short form:
rcadm -C <raid_type> -d <list> [-s <size_mb>] [-sub <num>]
[-sp <list>] [-ns] [-ds] [-ca <r, rw, w, nc>] [-ms]
[-n "name"] [-p <1..10>] [-z] [-sa] }
RAID Types:
--volume, -v Single disk or concatenation of disks (JBOD)
--raidable, -ra Single disk, RAIDABLE
--raid0, -r0 Stripe of two or more disks
--raid1, -r1 Mirror of two disks
--raid5, -r5 Stripes data as well as parity, across all disks in the array
--raid10, -r10 Stripe set of mirror sets
OPTIONS
-sp, --spare-disk
Specifies the dedicated spare disk or disks to assign, with a maximum of four. No space is
reserved on the selected disks.
-s, --size
Specifies the size of the array in MBs. If you do not use this option, the largest possible size is
used by default.
-ns, --no-sync
Disables background synchronization of redundant types when creating the array.
-ca, --cache
Specifies a cache setting for the array(s): read cache <r>, read and write-back cache <rw>, write-
back cache <w>, or no cache <nc>. The default is read and write-back cache <rw>.
-cts, --cachetagsize
Specifies the Cache Tag Size. This is the amount of data per disk in a stripe. Supported sizes are
64, 128, or 256; sizes in kB.
Please refer to Table 16, Default Cache Tag Size, on page 43.
-ms, --max-size
Prints the maximum possible size for an array without actually creating an array.
-n, --name
Identifies an array with a user-supplied name. The name can be up to 30 characters, but only 17 of
those characters display in the BIOS.
-p, --priority
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
116
rcadm Command Line Interface Tool
Chapter 7
Sets the background initialization task priority from 1 to 10, with 10 being the highest priority. For
redundant array types only.
-led, --leave-existing-data
Leaves the existing data on the disks untouched after the array is created. This option can be used
to try to recover user data when an array has been accidentally deleted or the configuration
information is lost but the data is still intact. Unless you immediately recreate the array after
deleting it and no other tasks have been performed, the likelihood of recovering data with this
method is very low.
-d, --disk
A required qualifier used with the --create option to specify the disk or disks to be included in the
array.
-sa, --scan-array
Specifies that a background array scan should be continuously run whenever the array is idle
(Default is off).
-z, --zero
Zero the array in the foreground. This method is faster than doing a background consistency
verifies if the array is a redundant type. For non-redundant types, the zero option can be used to
verify all blocks in the array can be accessed.
EXAMPLES
Example: Create a RAID1 set of the maximum possible size using all disks.
rcadm -C –raid1 --disk *
Example: Create a RAID1 set of the maximum possible size, with a spare disk and without a
background initialization task.
rcadm -C --raid1 --spare-disk 3 --disk 1 2 --no-sync
rcadm -D
DELETE
Long form:
--delete --array <list> [--no-ask]
Short form:
-D -a <list> [-na] [-cg <group number>]
OPTIONS
-na, --no-ask
If the no ask option is specified the array is deleted without confirmation.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 7
rcadm Command Line Interface Tool
117
EXAMPLES:
Example: Delete arrays 1 and 2.
rcadm -D --array 1 2
Example: Delete all arrays.
rcadm -D --array
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
118
Troubleshooting
Chapter 8
Chapter 8 Troubleshooting
8.1 Troubleshooting
The chapter discusses four major categories of troubleshooting:
• Problems with system startup.
• Warning messages that might appear at the Power-On Self-Test (POST) screen.
• Problems with arrays.
• Problems with disks.
• Template for adding the warning message when someone tries to create a RAID5 on a
system that isn’t supported.
8.2 System Startup Problems
Table 32 and Table 33 correlate possible startup issues and corrective actions for system boot.
Table 32. The System Does Not Boot
Possible Causes
Corrective Actions
Controller mode is set
incorrectly during system
startup
In the system’s BIOS screen, ensure SATA settings are in RAID
mode.
The system’s boot mode
or boot sequence retry
mode is set incorrectly
In the system’s BIOS screen, ensure that the bootable array is the first
array listed.
Swap arrays is not supported in UEFI.
A bootable array is in an
Offline state
Restart the system.
Enter the system’s BIOS screen.
Check the state of the bootable array.
Check for missing or offline disks.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 8
Troubleshooting
119
Table 33. The BIOS Configuration Utility Does Not Display
Possible Causes
Corrective Actions
The controller mode is set
incorrectly in the system
BIOS
In the system’s BIOS screen, ensure the SATA settings are correct.
Possible Causes
Native AHCI installation.
Corrective Actions
A Native AHCI installation will not boot into the OS, after changing
the BIOS settings to RAID mode.
8.3 Warning Messages: POST Screen
The POST screen is one of the first screens to appear during the system’s boot sequence. If the
system’s arrays were in Normal or Ready state prior to a system boot, the boot sequence
continues normally to the operating system.
But, if an array is in Critical or Offline state, or if specific options at Controller Options were
changed previously at the BIOS Configuration Utility, the warning messages displayed by OProm
are described in Table 34 appear during the boot sequence.
Table 34. POST Screen Warning Messages
Warning Message
Additional Information
Corrective Action
WARNING: Found arrays
that are Critical
[or equivalent]
This warning message appears when at
least one array is in a Critical state and
Toggle Pause if Critical is set to ON at
the BIOS Configuration Utility.
The Critical state of an array depends on
the RAID level of the array and the
number of disks that have failed. See
Section 2.3, Array States, on page 25, for
information on criticality.
If an array is Critical (even a bootable
array), the system can continue through
the boot process to the operating system.
See Section 8.5.1,
Troubleshooting Disks, on
page 124.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
120
Troubleshooting
Chapter 8
Table 34. POST Screen Warning Messages (Continued)
Warning Message
Additional Information
Corrective Action
WARNING: Found
arrays that are Offline
[or equivalent]
This warning message appears when at
least one array is in an Offline state and
Toggle Pause if Offline is set to ON at
the BIOS Configuration Utility.
If two or more disks in a redundant array
have failed, or if a single or multiple disk
in a non-redundant array have failed,
data has been lost.
In RAID10 array, if a single disk fails in
each mirrored set, the redundant array
goes to a Critical state but data is not
lost. If two disks fail in one of the
mirrored sets, the redundant array goes to
an Offline state and data is lost.
See Section 8.5.1, Troubleshooting
Disks, on page 124.
If, after performing a rescan, the state
remains Offline, the bootable array has
suffered an unrecoverable failure.
Create a new bootable array.
Reinstall the operating system and
drivers.
WARNING: Found
arrays that are Critical
and Offline
[or equivalent]
A bootable array that is in an Offline
state prevents the operating system from
booting.
BIOS NOT INSTALLED -
User Disabled INT13
BIOS Load
[or equivalent]
This warning message appears when
Toggle INT13 Boot Support option has
been set to OFF at the BIOS
Configuration Utility and another boot
device is not selected.
Bootable devices do not function with
the controller when Toggle INT13 Boot
Support is set to OFF. The default
setting is ON, which allows bootable
devices to function with the controller.
Restart the system.
Enter the system’s BIOS screen.
Select Main Menu > Controller
Options > Toggle INT13 Boot Support.
Change Toggle INT13 Boot Support
from OFF to ON.
Navigate to Main Menu.
Select Continue to Boot.
The system boot process continues to the
operating system.
8.4 Array-Related Errors
• Table 35. Cannot Create an Array, on page 121
• Table 37. An Array is in an Offline State, on page 122
• Table 36. An Array is in a Critical State, on page 122
• Table 38. Cannot Assign a Dedicated Spare to an Array, on page 122
• Table 39. Cannot Create a Global Spare, on page 123
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 8
Troubleshooting
121
• Table 40. Recreate a Deleted Array, on page 123
Table 35. Cannot Create an Array
Possible Causes
Additional Information
Corrective Actions
The disk is not displayed.
The controller cannot communicate
with the disks.
See Section 8.5.1, Troubleshooting
Disks, on page 124.
Insufficient free space
available on the selected
disks
Select a different combination of
disks.
Incorrect number of
disks selected for the
desired RAID level
See 2.2, RAID Levels, on page 24,
for a description of RAID levels and
the allowable number of disks used
with each RAID level.
Select the correct number of disks.
The desired disk is
unavailable.
The disk is a dedicated spare for a
different array.
The disk is full.
The disk’s available capacity is
insufficient.
Select a different disk.
The disk has SMART
errors.
An array can be created with a disk
that has SMART errors, but only if
the array is created in the BIOS
Configuration Utility.
RAIDXpert2 cannot be used to
create an array with a disk that has
SMART errors.
Use the BIOS Configuration Utility to
create the array.
The system already has a
maximum of eight arrays
Delete unused arrays.
CAUTION: Deleting an array
permanently destroys all data that is
on the array. This action cannot be
undone and it is very unlikely the data
can be recovered.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
122
Troubleshooting
Chapter 8
Table 36. An Array is in a Critical State
Possible Causes
Additional Information
Corrective Actions
One or more disks in the
array have failed or been
removed.
Due to the failed disk or disks, the array is no
longer maintaining redundant (mirrored or parity)
data.
The failure of an additional disk results in an
Offline state and lost data.
See Section 8.5.1,
Troubleshooting Disks,
on page 124.
Table 37. An Array is in an Offline State
Possible Causes
Additional Information
Corrective Actions
The array has lost the
maximum allowable
disks per RAID level.
One or more disks have failed.
• If the array is non-redundant, the failure of a
single disk causes the array to fail.
• If the array is redundant, the failure of two or
more disks causes the array to fail.
The array cannot be restored (rebuilt).
See Section 8.5.1,
Troubleshooting Disks,
on page 124.
Table 38. Cannot Assign a Dedicated Spare to an Array
Possible Causes
Additional Information
Corrective Actions
The RAID level does not
allow dedicated spares.
Dedicated spares cannot be created for
Volume or RAID0 arrays.
• Create an array with a different
RAID level and assign a
dedicated spare.
• Create a global spare.
The designated disk does
not have sufficient
capacity to be a dedicated
spare
The capacity of the disk selected to be a
dedicated spare must be equal to or
larger than the capacity of the smallest
disk in the array.
Select a different disk.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 8
Troubleshooting
123
Table 39. Cannot Create a Global Spare
Possible Causes
Additional Information
Corrective Actions
The disk is already part
of an array
A global spare cannot be selected if it
is already part of an existing array.
Select a different disk.
There are no empty disks
available or the disks
have not been initialized
A disk with a legacy state can be
initialized, if desired, but it is no
longer legacy (initialization adds
RAIDXpert2 configuration
information to the disk).
Install additional disks.
Initialize the disks.
CAUTION: When a disk is initialized,
all data on the disk is lost.
The disk assigned as the
global spare has failed or
is missing.
See Section 8.5.1, Troubleshooting
Disks, on page 124.
Table 40. Recreate a Deleted Array
Possible Causes
Additional Information
Corrective Actions
An array(s) was
accidentally deleted, or
the wrong array was
deleted
This procedure might
recreate a deleted array and
with its data intact.
However, this is not
guaranteed to occur.
If I/O was running to the
deleted array(s) just prior
to it being deleted, there
might be some data loss in
the recreated array(s).
If multiple arrays were
deleted, all of the deleted
arrays must be recreated in
order to recover the desired
array.
1. At the Array pop-up menu, select Create.
2. Create a new array using the same settings
as the deleted array.
• The same disks.
• The same RAID type (RAID level).
• The same capacity.
• The same cache options.
3. Check Leave Existing Data Intact.
4. Click Create.
5. Ensure the settings are the same as the
deleted array:
• The same drive letter.
• The same RAID type (RAID level).
• The same disks.
• The same capacity.
• The same cache option
6. Check the data files of the array for
corrupted or missing files, incorrect file
extensions, and so on.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
124
Troubleshooting
Chapter 8
8.5 Disk Related Errors
• Table 41. Disk Errors
• Section 8.5.1, Troubleshooting Disks, on page 124.
Table 41. Disk Errors
Possible Causes
Additional Information
Corrective Actions
A disk has been removed from
an array
See Section 8.5.1,
Troubleshooting Disks, on page
124.
A disk is not visible in the
BIOS Configuration Utility or
is offline
A disk is highlighted red at the
BIOS Configuration Utility
The disk has failed.
Depending on the RAID level of
the array, data might be lost.
RAIDXpert2 cannot
communicate with the spare
The dedicated spare is not visible
in the BIOS Configuration Utility
or is offline.
The disk cannot be initialized
Only disks that are Ready can be
initialized.
CAUTION: When a disk is
initialized, all data on the disk is
lost.
• Ensure the disk is not already
a member of an array.
• Ensure the disk is still
assigned as a global or
dedicated spare.
• Ensure the disk is reporting a
Ready state.
Troubleshooting Disks
Perform the following actions when there may be a problem with a disk.
• Ensure there is no damage to the system’s backplane.
• Ensure all cables are installed correctly.
• Ensure the disk is seated correctly in the backplane or bay and the latch is secured.
• Reinsert the disk.
• Replace the disk.
• After reconnecting, reseating, reinserting, or replacing a disk:
Perform a rescan.
Initialize the disk.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 8
Troubleshooting
125
CAUTION: When a disk is initialized, all data on the disk is lost.
If problems with a disk have caused an array to go Critical, it may be necessary to also assign a
dedicated or global spare for the array.
If problems with a disk have caused an array to go Offline, data may have been lost. Recover lost
data from a backup storage source.
8.6 Troubleshooting the RAIDXpert2 GUI
Table 42. RAIDXpert2 Graphical User Interface (GUI) Troubleshooting
Table 42. RAIDXpert2 Graphical User Interface (GUI) Troubleshooting
Problem
Possible Cause
Corrective Actions
License Level 0 when logging
in.
The RAIDXpert2-CGI (rc_cgi)
service stopped working or not
running.
Restart the rc_cgi service.
Cannot reach this page or
similar.
The Apache service has stopped
working or not running.
Restart the Apache service.
GUI blank, no array or disk
information.
Array name contains a forbidden
character.
Open a Command Prompt in
Windows.
Type cd C:\Program Files
(x86)RAIDXpert2
Enter the following command:
rcadm.exe -M -n
“NewName” -a #
Where # is the Array that has the
forbidden character in its name.
Press Enter.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
126
Safety Precautions
Chapter 9
Chapter 9 Safety Precautions
9.1 General
This section includes general safety precautions and specific RAIDXpert2 cautions. Read and
keep this user manual for future reference.
9.2 Safety Definitions
CAUTION: Indicates that failure to follow directions could result in damage to equipment or
data.
IMPORTANT: Provides clarifying information or specific instructions.
Note: Provides additional information.
TIP: Provides helpful hints and shortcuts.
9.3 Caution Messages
This section lists the Caution messages that appear in this user guide.
Caution Messages About Disks
CAUTION: Assigning a dedicated spare does not reserve space on the disk. Therefore, an
automatic restore is not guaranteed if a disk fails. If a disk fails, make space on the
disk for the fail-over to complete, or assign a different disk with enough space. If a
dedicated spare is assigned and a disk fails, the restore process starts automatically,
if there is enough space available on the dedicated spare.
CAUTION: If a disk is part of an AMD-RAID array, the disk cannot be selected for initialization.
To initialize the disk anyway, delete the AMD-RAID array. Data on the disk is deleted
during initialization so ensure the correct disks are chosen to initialize.
CAUTION: A legacy disk can contain valid data. When a legacy array is deleted, or when its
corresponding legacy disk is initialized, the data is lost.
CAUTION: When a disk is initialized, all data on the disk is lost.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 9
Safety Precautions
127
Caution Messages about Arrays
CAUTION: Deleting an array permanently destroys all data that is on the array. This action
cannot be undone and it is very unlikely the data can be recovered.
CAUTION: Do not delete the first array listed if it is the AMD-RAID bootable array. Doing this
deletes the operating system and AMD-RAID files.
CAUTION: Do not initialize a disk that is part of an array. Initializing a disk in a non-redundant
array deletes the array and its data. The array no longer appears in Array View. This
is especially true for a non-redundant bootable array. Initializing a disk in a non-
redundant bootable array causes the array to Fail and deletes the operating system,
AMD-RAID files, and device drivers.
CAUTION: Leaving Write Back Cache enabled for disks can increase the likelihood of data being
corrupted if the system experiences a power interruption or unexpected shutdown.
CAUTION: Prior to removing an array, unmount the array Linux
®
.
CAUTION: All data contained in a AMD-RAID array are lost if the disks of the array are
migrated to a non-AMD-RAID system.
CAUTION: When an array is securely erased, the data on the array is lost. The array remains
hidden after the secure erase completes. User must Un-hide the array for data
operations.
CAUTION: In some circumstances, more than eight arrays are possible. They might appear to
function properly but are not supported.
CAUTION: If the user creates an Array with Skip Initialization, the array will not be redundant.
CAUTION: Controller support for AMD SP3 compatible processors are as follows:
7 NVMe + 4-SoC when x570/590 is set to RAID in the BIOS
8-NVMe + 2-SoC + 1-PT when set to RAID in the BIOS
10-NVMe when SoC and PT are Disabled in the BIOS
10-NVMe + 1-PT when SoC is Disabled in the BIOS
9-NVMe + 2-SoC when PT is Disabled in the BIOS
CAUTION: Hot-Swapping is not recommended for disks that are part of AMD-RAID array.
CAUTION: AMD SP3 compatible processors support a maximum of 14 SATA ports on the system
depending on customer platform design (8 from PT SATA controller, 6 from AMD
SATA controller including devices connected to M.2 port).
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
128
Safety Precautions
Chapter 9
CAUTION: Maximum number of disks (both NVMe and SATA) that can be used for
Creating/Transforming a Volume, RAID-0, RAID-5, and RAID-10 arrays is eight. For
RAID-1 only two disks are supported.
CAUTION: RAID on AMD platforms support M.2 ports, both on the SATA controller and PCIe
M.2 NVMe. At any given time, each M.2 port can support either M.2 SATA or M.2
NVMe, but not both.
CAUTION: Individual disks which are not part of a RAID array will not be listed in Device
Manager under the Disk Drive section. Individual Disks can be managed through
RAIDXpert2 management utility, HII and the EFI shell.
CAUTION: If a user wants to add or remove a NVMe into a system; it is AMD’s recommendation
that a reset of the system is performed, wait for the BIOS screen to appear, then power
off the system and add or remove the NVMe(s).
CAUTION: A Native AHCI installation will not boot into the OS, after changing the BIOS
settings to RAID mode.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 10
Software License: EULA
129
Chapter 10 Software License: EULA
10.1 Software License: End-User License Agreement
(EULA)
BY INSTALLING, DOWNLOADING AND/OR USING THE SOFTWARE THAT
ACCOMPANIES THIS END USER LICENSE AGREEMENT (“AGREEMENT”) AND ANY
ASSOCIATED DOCUMENTATION OR UPDATES THERETO ("SOFTWARE"), YOU
AGREE THAT, WHETHER AS AN INDIVIDUAL OR AUTHORIZED REPRESENTATIVE
OF AN ENTITY, YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE
TO BE BOUND BY IT. IF YOU DO NOT AGREE TO IT, YOU ARE NOT AUTHORIZED TO
INSTALL, DOWNLOAD OR OTHERWISE USE THE SOFTWARE AND ARE ASKED TO
PLEASE RETURN THE SOFTWARE TO THE PARTY FROM WHOM YOU RECEIVED IT.
THE RIGHT TO USE THE SOFTWARE IS GRANTED ONLY UPON THE CONDITION
THAT YOU AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT.
FURTHER, YOU UNDERSTAND THAT THIS SOFTWARE MAY ONLY BE OBTAINED
FROM Advanced Micro Devices, Inc. (“AMD”) OR AN AUTHORIZED DISTRIBUTOR OF
AMD. IF YOU OBTAINED THIS SOFTWARE FROM ANY OTHER SOURCE, THAT
SOURCE PROVIDED IT TO YOU ILLEGALLY, AND YOU HAVE NO RIGHT TO
INSTALL, DOWNLOAD OR OTHERWISE USE THE SOFTWARE; SUCH USE IS A
VIOLATION OF INTELLECTUAL PROPERTY RIGHTS.
Limited License to Authorized Distributors
If you are an OEM, distributor, reseller, integrator or other entity in the business of providing
technology products and/or services, and if you have been expressly authorized to distribute copies
of the Software to End User(s), you are an "Authorized Distributor." Subject to the terms and
conditions of this Agreement, you are granted a limited, non-exclusive, non-transferable, non-sub
licensable license to distribute and/or install the Software in its unaltered, object code form solely
(i) to, and on behalf of, a purchasing End User for the End User’s internal business purposes; and
(ii) only for use with one (1) AMD product, purchased through authorized AMD sales channels.
Except as specifically stated in this Section 1, Authorized Distributors are expressly prohibited
from: copying and/or distributing the Software in whole or in part; using the Software to provide
consulting or other services to third parties; and distributing the Software in any form or format.
Authorized Distributors are subject to all other terms and conditions of this Agreement.
Authorized Distributors must ensure that its End Users see and agree to this Agreement.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
130
Software License: EULA
Chapter 10
Limited License to End Users
If you have licensed the Software for your own personal use or your company's internal use, you
are an "End User." You are hereby granted, subject to the terms and conditions of this Agreement,
a limited, non-exclusive, non-transferable, non-sublicensable license to use this Software in its
unaltered, object code form solely (i) for internal business purposes; and (ii) only with respect to
one (1) AMD product that was purchased through authorized AMD sales channels. Further, you
must obtain this Software only from authorized AMD sales channels. Obtaining it from any other
source is a violation of the intellectual property rights of AMD and its licensors.
Restrictions
Except as expressly authorized in Sections 1 and 2 above, Authorized Distributors and End Users
(collectively "You”) shall not (nor cause or permit any other person to): (i) reverse engineer,
translate, disassemble, derive source code from, decompile, rent, lease, manufacture, adapt, create
derivative works from, or otherwise modify or distribute the Software or any part thereof; (ii)
copy, in whole or in part, the Software with the exception that only End Users may make one copy
of the Software for their backup or archival purposes; (iii) publicly display the Software or use the
Software to provide consulting or other services to third parties; or (iv) delete any copyright,
trademark, patent or other notices of proprietary rights as they appear anywhere in or on the
Software.
Proprietary Rights
The Software is primarily the intellectual property of Seagate Technology PLC. (“Seagate”) and
its licensors (“Licensors”). In no event shall You obtain title to the Software or any component
thereof. As between Seagate and You, Seagate has all rights, title, interest, ownership and
proprietary rights in and to the Software. Seagate's rights include, but are not limited to, all copies
of the Software and any patent rights, copyrights, trademark rights, trade secret rights, and any
other intellectual property right recognized in any country or jurisdiction in the world.
The Software is protected by both United States law and international treaty provisions.
All rights not expressly granted in this Agreement are reserved by Seagate and Licensors,
respectively.
Certain modifications to the Software are the intellectual property of Advanced Micro Devices,
Inc. As between AMD and You, AMD has all rights, title, interest, ownership and proprietary
rights in and to those modifications including but not limited to any patent rights, copyrights,
trademark rights, trade secret rights, and any other intellectual property right recognized in any
country or jurisdiction in the world.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Chapter 10
Software License: EULA
131
Terms and Conditions
This Agreement shall continue in effect until terminated. AMD may terminate this Agreement
immediately if You fail to comply with any provision of this Agreement. Upon termination, You
shall discontinue use of the Software, and either destroy, erase, or return all copies of the Software
in Your possession or control.
No Warranty
THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED. SEAGATE AND AMD DISCLAIM, ON THEIR OWN BEHALF
AND ON BEHALF OF LICENSORS, ANY EXPRESS OR IMPLIED WARRANTIES
INCLUDING ANY IMPLIED WARRANTIES OF NONINFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE SOFTWARE
OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR
ERROR-FREE OR WILL OPERATE IN COMBINATION WITH OTHER SOFTWARE OR
HARDWARE. Seagate and its Licensors will not provide support for the Software and, to the
extent you believe that are entitled to support, you are advised to contact the party from whom you
received the Software. Notwithstanding the foregoing, Updates to the Software (which may or
may not be distributed) shall be governed by this Agreement, and such Updates will be considered
Software for purposes of this Agreement.
The Software is not absolutely fault-tolerant and is not designed, manufactured or intended for use
or resale as on-line control equipment in hazardous environments requiring fail-safe performance
in which the failure of the Software could lead directly to death, personal injury or severe physical
or environmental damage, such as the operation of nuclear facilities, aircraft navigation, air traffic
control, direct life support machines, or weapons systems (“High Risk Activities”). Express or
implied warranties for High Risk Activities are specifically disclaimed.
Limitation of Liability
IN NO EVENT SHALL SEAGATE, AMD OR LICENSORS BE LIABLE TO ANY PARTY
FOR ANY LOST REVENUE, LOST PROFIT OR DATA, OR FOR SPECIAL, INDIRECT,
CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED, AND
REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OF OR
INABILITY TO USE THE SOFTWARE EVEN IF THEY HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL SEAGATE’s, AMD’s or
LICENSORS’ LIABILITY, TO YOU, WHETHER IN CONTRACT, TORT (INCLUDING
NEGLIGENCE) OR OTHERWISE, EXCEED THE AMOUNT OF ANY FEE PAID BY YOU
FOR THE SOFTWARE. THE FOREGOING LIMITATIONS SHALL APPLY EVEN IF THE
REMEDY FAILS OF ITS ESSENTIAL PURPOSE. Some jurisdictions do not allow for the
exclusion of implied warranties as described in Section 6, or the limitation of liabilities as
described in this Section 7, so the above exclusions or limitations may not apply to You. In that
event, to the extent permissible, any exclusion of warranties or limitation of liability will be
limited in duration or type to the greatest extent allowed by law.
AMD-RAIDXpert2 User Guide
53987 Rev. 3.11 June 2020
132
Software License: EULA
Chapter 10
Export Controls
You agree to comply fully with all relevant export laws, regulations, treaties, and orders ("Export
Laws") to assure that neither the Software nor any components thereof are (i) exported, directly or
indirectly, in violation of Export Laws; or (ii) are intended to be used or are used for any purposes
prohibited by the Export Laws.
General
This Agreement and any disputes arising from or relating to it shall be governed by and construed
in accordance with the laws of the State of Colorado without reference to conflict of laws
principles and excluding the U.N. Convention on Contracts for the International Sale of Goods.
Any legal action or proceeding shall be instituted in a state or federal court in Denver, Colorado,
U.S.A. and You agree to be subject to the jurisdiction of these courts. Taxes and charges imposed
by any government with respect to the Software shall be paid by the End User. The waiver by
either party of a breach of this Agreement or a failure to exercise any right hereunder shall not
operate or be construed as a waiver of any subsequent breach or as a waiver of any other right. If
any provision of this Agreement is held to be unenforceable or overbroad for any reason, it will be
modified rather than voided, if possible, in order to achieve the intent of the parties to the extent
necessary to make the provision enforceable under applicable law and enforced as amended. In
any event, all other provisions of this Agreement will be deemed valid and enforceable to the full
extent. This Agreement constitutes the complete agreement between the parties and supersedes all
prior or contemporaneous agreements or representations, written or oral, concerning the subject
matter of this Agreement including any purchase order or ordering document. This Agreement
may not be modified or amended except in writing and signed by both parties.
53987 Rev. 3.11 June 2020
AMD-RAIDXpert2 User Guide
Appendix A
133
Appendix A Browser Setup
Browser Setup
• Use Chrome version 20, Firefox version 14, Internet Explorer 8, or Safari 6, or a greater
version of each.
• To optimize the display, use a color monitor and set its color quality to the highest setting.
